Chain Backlash Check; Chain Backlash Adjustment; Checking Wear Of Chain, Front And Rear Sprockets - APRILIA CAPONORD Manual

Chain backlash check (04_40)

To check the clearance:
•
Shut off the engine.
•
Rest the vehicle on its stand.
•
Engage neutral gear.
•
Check that the vertical oscillation at a point between the pinion and the crown
on the lower branch of the chain is approx. 25 - 30 mm (0.98 - 1.18 in).
•
Move the vehicle forward so as to check the chain vertical oscillation in other
positions too. clearance should remain constant at all wheel rotation phases.
04_40
If clearance is uniform but over 30 mm (1.18 in) or below 25 mm (0.98 in), adjustment
is necessary.
CAUTION
IF CLEARANCE IS GREATER AT SOME POSITIONS, THIS MEANS THAT SOME
CHAIN LINKS ARE FLATTENED OR JAMMED.
TO AVOID RISK OF SEIZURE, LUBRICATE THE CHAIN ON A REGULAR BASIS.

Chain backlash adjustment

CAUTION
TO ADJUST THE CHAIN BACKLASH, PLEASE CONTACT AN Official Aprilia
Dealer. IF YOU ARE ADEQUATELY TRAINED AND EXPERIENCED, REFER TO
THE INSTRUCTIONS IN THIS WORKSHOP BOOKLET AVAILABLE ALSO AT
ANY DEALER.

Checking wear of chain, front and rear sprockets

Also check the following parts and make sure that the chain, pinion and sprocket do
not have:
•
Damaged rollers.
•
Loosened pins.
145