Suspension; Lubrication; Inspection; Adjustment - BOMBARDIER 2006 outlander max 400 Operator's Manual

SUSPENSION

Lubrication

Lubricate front A-arms. Use suspen-
sion synthetic grease (P/N 293 550
033 or an equivalent). There is two
grease fittings on each A-arm.

Inspection

Front Suspension
Inspect the McPherson struts for oil
leaks or other damages. Check tight-
ness of fasteners. See an authorized
Bombardier ATV dealer as necessary.
Rear Suspension
Inspect shock absorber for oil leaks
and fasteners for tightness. See an
authorized Bombardier ATV dealer as
necessary.
Trailing Arms
Check trailing arms for distortion,
cracks or bending. See an authorized
Bombardier ATV dealer if any problem
is detected.
A-Arms
Check A-arms for cracks, bending or
other damages. See an authorized
Bombardier ATV dealer as necessary.

Adjustment

Rear Shocks
WARNING
Left and right adjustment cams
must always be set to the same
position. Never adjust one adjust-
ing cam only. Uneven adjustment
can cause poor handling and loss
of stability, which could lead to an
accident.
_____________________
146
Preload Adjustment
Adjust spring preload by turning ad-
justing cam accordingly, with the ad-
justing wrench in vehicle tool box.
Turn the adjusting cams clockwise for
a firmer ride and rough road condition
or when carrying cargo or pulling a trail-
er.
Turn the adjusting cams counterclock-
wise for a light load and a smooth road
condition.
2
V07J01Y
1. Adjusting cams
2. Smooth adjustment
3. Hard adjustment
1 3