BOMBARDIER 2006 outlander max 400 Operator's Manual page 141

Beam Aiming Adjustment
Adjust beam aiming as follows:
Turn knobs to adjust beam height and
side orientation to your convenience.
Adjust both headlamps evenly.
vmo2006-005-040_b
1. Headlamp cover
2. Adjustment screws
Taillight
Unscrew lens screws to expose bulbs.
V07G04Y
1. Lens
2. Screws
While reading this Operator's Guide, remember that:
Indicates a potential hazard that, if not avoided, could result in serious in-
jury or death.
2 1
_____________________
Push the bulb in and hold while turning
counterclockwise to release.
Install the new bulb by first pushing in
while turning clockwise.
Speedometer
The speedometer is lighted with
LEDs. If one LED burnt, replace the
speedometer. The LEDs are not avail-
able separately.
WARNING
139