Suspension - BOMBARDIER Rally 200 Operator's Manual

Loosen lock nut then turn the adjuster
to obtain correct throttle lever free
play.
NOTE:
Measure throttle free play at
the tip of throttle lever.
Tighten lock nut and reinstall protector.
2 3
V06A0WY
1. Throttle lever
2. Protector
3. Cable adjuster
4. Lock nut
A. 3 to 8 mm (1/8 to 5/16 in)
With the transmission lever on NEU-
TRAL position,
Check if the throttle cable is adjusted
correctly by turning handlebar fully
right then fully left. If the engine RPM
increases, readjust the throttle lever
free play.

Suspension

Adjustment
WARNING
Adjust both springs to the same
length. Uneven adjustment can
cause poor handling and loss of
stability and/or control, and in-
crease the risk of an accident.
Spring preload may vary from rider
to rider depending upon their weight.
Preload can be changed by setting
both lock nuts up or down to com-
press the spring to different lengths.
4 1 A
start the engine.
Shorten the spring for a firmer ride and
rough road condition.
Lengthen the spring for a light load and
a smooth road condition.
V06J0GY
FRONT SUSPENSION
A. Same length on both sides
Lubrication
A-Arm
Lubricate front A-arms. Use synthetic
grease (P/N 293 550 033) or an equiv-
alent. There is two grease fittings on
each A-arm.
V06J01Y
1. Grease fittings
_____________________
A
1
103