BOMBARDIER 2006 outlander max 400 Operator's Manual page 98

WARNING
Without its passenger's seat, the
vehicle becomes a one-rider vehi-
cle and NO PASSENGER must be
allowed on vehicle. NEVER carry
passenger on storage box.
Passenger's Seat Removal
– Pull one of the passenger's seat
latch levers. Those levers are locat-
ed underneath the RH or LH rear
end of seat.
vmo2006-008-009_a
TYPICAL — LH SIDE
1. Seat latch
– Gently lift the rear of seat.
– Pull seat rearwards.
– Continue lifting movement until you
can release the front retaining de-
vice then completely remove pas-
senger's seat.
______________________
96
Passenger's Seat Installation
– Insert passenger's seat position-
ing tubes into rear fender provided
holes.
vmo2006-008-010_a
1. Holes for passenger's seat positioning tubes
– When seat rests in its position, firm-
ly push seat down to latch.
NOTE: A distinctive snap will be felt.
Double check that the seat is secure
by giving it a tug to confirm proper
latching.
WARNING
Make sure seat is securely latched
before riding.
Storage Box Removal
– Pull storage box strap to release
from vehicle.
– Remove storage box.
vmo2006-008-012_a
1. Strap