BOMBARDIER 2006 outlander max 400 Operator's Manual page 119

VEHICLE CANNOT REACH FULL SPEED (cont'd)
3. Air filter/box plugged or dirty.
–
Check air filter and clean if necessary.
–
Check deposits in air box drain.
–
Check the position of the air intake tube.
4. CVT dirty or worn-out.
–
Contact an authorized Bombardier ATV dealer.
TRANSMISSION LEVER IS HARD TO MOVE
1. Transmission gears are in a position that prevents the transmission lever
to work.
–
Rock the vehicle back and forth to move the gears in the transmission and
allow the transmission lever to be set.
2. Engine idle speed is set too high.
–
Adjust the idle speed. Refer to the SPECIFICATIONS.
3. CVT dirty or wear.
–
Contact an authorized Bombardier ATV dealer.
THE RPM INCREASES BUT THE VEHICLE DOES NOT MOVE
1. The transmission is on PARK or NEUTRAL position.
–
Select the Reverse, HI or LO position.
2. CVT dirty or worn-out.
–
Contact an authorized Bombardier ATV dealer.
3. Water in the CVT housing.
–
Contact an authorized Bombardier ATV dealer.
_____________________
117