BOMBARDIER Rally 200 Operator's Manual page 109

3. Chain tensioner plugged.
–
Contact an authorized Bombardier ATV dealer.
4. Timing chain wear.
–
Contact an authorized Bombardier ATV dealer.
Vehicle cannot reach full speed
1. Engine.
–
See ENGINE LACKS ACCELERATION OR POWER.
2. Parking brake.
–
Ensure brake lever lock is completely removed.
3. Air filter/box plugged or dirty.
–
Check air filter and clean if necessary.
–
Check deposits in air box drain.
–
Check the position of the air intake tube.
4. CVT dirty or wear.
–
Contact an authorized Bombardier ATV dealer.
Transmission lever is hard to move
1. Transmission gears are in a position that prevents the transmission lever to
work.
–
Rock the vehicle back and forth to move the gears in the transmission and
allow the transmission lever to be set.
2. Engine idle speed is set too high.
–
Adjust the idle speed. Refer to the SPECIFICATIONS.
3. CVT dirty or wear.
–
Contact an authorized Bombardier ATV dealer.
The RPM increases but the vehicle does not move
1. The transmission is in NEUTRAL position.
–
Set transmission in REVERSE or HI.
2. CVT dirty or wear.
–
Contact an authorized Bombardier ATV dealer.
3. Water in the CVT housing.
–
Contact an authorized Bombardier ATV dealer.
_____________________
108