BOMBARDIER Rally 200 Operator's Manual page 66

Hide thumbs Also See for Rally 200:
Table of Contents

Advertisement

1
V06A1AY
1. OFF
2. ON position "without light"
3. ON position "with light"
Engine Stop Switch
Located on the top of multi-func-
tion switch, at the right of headlamp
switch. The engine will turn over but
will not start if the engine stop switch
is turned to OFF position.
This switch can be used to stop engine
and as an emergency control.
NOTE:
While engine can be stopped
by turning ignition key OFF, we recom-
mend the engine be stopped by the
engine stop switch.
V06I11Y
1. Engine stop switch
Start Button
Located below engine stop switch.
To start engine, place the engine stop
switch to RUN.
3
2
1
Press and hold the start button. Re-
lease immediately after engine is
started.
1
V06I12Y
1. Start button
To stop engine, fully release throttle
lever then use the engine stop switch.
Override Button
Located in front of multi-function
switch.
1
V06I10Z
1. Override button
This button is used to override the re-
verse speed limiter system and while
power backing up. To do this, squeeze
and hole the override button then ac-
tive the throttle lever. Release the but-
ton when the maneuver is completed.
_____________________
65

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents