Page 2
Information in this document is subject to change without notice. Reproduction in any manner whatsoever, without the written permission of D-Link Corporation, is strictly forbidden. Trademarks used in this text: D-Link and the D-LINK logo are trademarks of D-Link Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation.
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide Intended Readers The DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide contains detailed information about the hardware specifications of the switches in this series. It also contains brief information on how to configure and manage a switch in this series.
Switch Description The DXS-1210 series is the latest next generation of Smart Managed switches from D-Link. Switches in this series feature a wide selection of different ports types and speeds that can be used to interconnect a variety of networking devices to communicate with each other.
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide 2. Hardware Components Front Panel Components Rear Panel Components Side Panel Components Front Panel Components The front panel features a variety of ports, LED indicators, and a button. This following table lists the front panel components on all the switches in the series:...
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide This following table lists the front panel components unique to the DXS-1210-28S: Port Type Port Number Description SFP+ Ports Ports 1 to 24 This switch is equipped with 24 SFP/SFP+ ports that can...
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide Color Status Description Link down or no link Link/Act Green On (Solid) Active connection at 25 Gbps through the port (25GE SFP28 ports) On (Blinking) Data transmitted and received through the port...
Figure 2-8 DXS-1210-28S Side Panels Smart Fans The DXS-1210 Series Switches includes smart fans that will automatically change their speed depending on the internal temperature detected by the sensors built-in the Switch’s hardware. The following table lists at what temperature the speed of the fan(s) will change:...
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide 3. Installation Installation Guidelines Installing the Switch without a Rack Installing the Switch in a Standard 19" Rack Installing Transceivers into the Transceiver Ports Connecting AC Power to the Switch...
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide Installing the Switch in a Standard 19" Rack This section is used to guide the user through installing the Switch into a switch rack. The Switch can be mounted in a standard 19"(1U) rack using the rack mounting kit included in the package contents.
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide Installing Transceivers into the Transceiver Ports The DXS-1210-28S is equipped with SFP+ ports and the DXS-1210-28T with SFP28 ports. These ports can be used to connect various networking devices to this switch that do not support the standard RJ45 wiring connection. These ports are generally used to connect this switch to optical fiber connections and can be used to connect devices to the Switch over great distances.
Page 14
The figure below illustrates how to insert SFP+/SFP28 transceivers into the 25GE SFP28 ports. Figure 3-5 Inserting SFP+/SFP28 transceivers into the SFP28 ports NOTE: For the full list of D-Link SFP/SFP+/SFP28 transceivers that are supported on the Switch, refer to the Supported SFP/SFP+/SFP28 Transceivers table on page 23.
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide Connecting AC Power to the Switch To install the AC power supply to the Switch correctly, plug one end of the AC power cord into the AC power socket of the Switch and the other end of the AC power cord into the local AC power source outlet.
Page 16
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide Plug the AC power cord into the power socket of the Switch. Figure 3-7 Connect the power cord to the Switch Slide the retainer through the tie wrap until the end of the cord.
Page 17
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide Circle the tie of the retainer around the power cord and into the locker of the retainer. Figure 3-9 Circle around the power cord Fasten the tie of the retainer until the power cord is secured.
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide 4. Switch Connections Switch to End Node Switch to Switch Switch to Server Switch to End Node An end node is a generic name for edge networking devices that will be connected to this switch. Typical examples of end nodes are Personal Computers (PCs), Notebooks, Access Points, Print Servers, VoIP Phones and more.
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide Switch to Server The Switch is ideal for connecting to a network backbone, server, or server farm. The RJ45 ports operate at speeds of 100 Mbps and 1/10 Gbps, the SFP+ ports operate at speeds of 1/10 Gbps, and the SFP28 ports operate at speeds of 10/25 Gbps.
Enter key. The Console port offers an Out-Of-Band (OOB) connection to the CLI and the LAN ports offers an in-band connection to the CLI using Telnet or SSH. NOTE: For more information about the CLI, refer to the DXS-1210 Series CLI Reference Guide. Connecting to the Console Port The Console port is used to connect to the CLI of the Switch.
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide Logging into the CLI At the login screen, enter the Username and Password and press Enter after each entry to access the CLI. DXS-1210-28T 10 Gigabit Ethernet Smart Managed Switch Command Line Interface Firmware: Build 1.00.009...
Internet Explorer, Mozilla Firefox, Google Chrome, or Safari. The LAN ports offers an in-band connection to the Web UI using HTTP or HTTPS (SSL). NOTE: For more information about the Web UI, refer to the DXS-1210 Series Web UI Reference Guide. Connecting to the Web UI To access the Web UI, open a standard web browser, enter the IP address of the Switch into the address bar of the browser, and press the Enter key.
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide Web Interface Navigation When the Web UI is accessed for the first time, the user is guided through the setup Wizard. After the setup wizard steps, the main interface of the Web UI can be accessed.
Page 24
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide The following illustrates the areas available in the Web UI in the Surveillance Mode: AREA 1 AREA 2 AREA 3 Figure 5-5 Web User Interface Areas (Surveillance Mode) In the following table, the areas in the Web UI are described:...
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide SNMP-based Management The Switch can be managed with an SNMP-compatible console program. The Switch supports Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. An SNMP agent decodes the incoming SNMP messages and responds to requests with MIB objects stored in the database.
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide Appendix A - Technical Specifications Physical Specifications Feature Description Dimensions DXS-1210-28T 441 mm (W) x 209.5 mm (D) x 44 mm (H) DXS-1210-28S 441 mm (W) x 209.5 mm (D) x 44 mm (H)
Page 27
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide Performance Specification Feature Description Switching Capacity DXS-1210-28T 680 Gbps DXS-1210-28S 560 Gbps MAC Address Table Up to 32K entries (256 static MAC addresses) Transmission Method Store and forward Packet Buffer...
Page 28
IEEE 802.3ae (10GBASE-R) IEEE 802.3by (25GBASE-R) All SFP28 ports are backwards compatible to support SFP+ transceivers. For the full list of D-Link transceivers that are supported on the Switch, refer to the Supported SFP/SFP+/SFP28 Transceivers table on page 23. Supported SFP/SFP+/SFP28 Transceivers...
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide Appendix B - Cables and Connectors Ethernet Cable When connecting the Switch to another switch, a bridge, or hub, a straight-through Category 5/5e/6a/7 cable is necessary. The following diagrams and tables show the standard RJ45 receptacle/connector and their pin assignments.
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide Console Cable A console cable is used to connect to the RJ45 console port of the Switch to access the command line interface. The following diagram and table show the standard RJ45 to RS-232cable and pin assignments.
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide Safety/Sécurité Safety Instructions Consignes de sécurité General Precautions for Rack-Mountable Products Protecting Against Electrostatic Discharge Safety Instructions Please pay careful attention to the following safety guidelines to ensure your own personal safety and to help protect your system from potential damage.
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide Observe the extension cable and power strip ratings. Make sure that the total ampere rating of all products plugged into the extension cable or power strip does not exceed 80 percent of the ampere ratings limit for the extension cable or power strip.
Page 34
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide Avant de procéder à l'entretien, débranchez tous les cordons d'alimentation pour mettre le périphérique hors tension. Eloignez le système des radiateurs et des sources de chaleur. Par ailleurs, n'obturez pas les fentes d'aération.
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide General Precautions for Rack-Mountable Products Please pay careful attention to the following precautions concerning rack stability and safety. Systems are considered to be components in a rack. Thus, a component refers to any system, as well as to various peripherals or supporting...
DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide Protecting Against Electrostatic Discharge Static electricity can harm delicate components inside the system. To prevent static damage, discharge static electricity from your body before touching any of the electronic components, such as the microprocessor. This can be done by periodically touching an unpainted metal surface on the chassis.
The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same, along with proof of purchase of the product (such as a copy of the dated purchase invoice for the product) if the product is not registered.
Page 38
D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice. Copyright 2004 by D-Link Corporation/D-Link Systems, Inc.
Page 39
Product Registration Register your D-Link product online at http://support.dlink.com/register/ Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
Page 40
This guide is only for initial configuration. Please refer to the user manual to learn more or visit http://www.mydlink.com for more information. Also feel free to contact us. U.S. and Canadian customers can contact D-Link Technical Support through our website. http://support.dlink.com Canada...
Page 41
Europe customers TECHNICAL SUPPORT TECHNISCHE UNTERSTÜTZUNG ASSISTANCE TECHNIQUE ASISTENCIA TÉCNICA SUPPORTO TECNICO TECHNISCHE ONDERSTEUNING POMOC TECHNICZNA TECHNICKÁ PODPORA TECHNIKAI TÁMOGATÁS eu.dlink.com/support TEKNISK STØTTE TEKNISK SUPPORT TEKNINEN TUKI TEKNISK SUPPORT ASSISTÊNCIA TÉCNICA ΤΕΧΝΙΚΉ ΥΠΟΣΤΉΡΙΞΗ TEHNIČKA PODRŠKA TEHNIČNA PODPORA SUPORT TEHNIC ТЕХНИЧЕСКА ПОДДРЪЖКА TECHNICKÁ...
Page 42
Indonesia - www.dlink.co.id Malaysia - www.dlink.com.my Philippines - www.dlink.com.ph Vietnam - www.dlink.com.vn Korea customers Tel : 1899-3540 Monday to Friday 9:30am to 6:30pm Web : http://d-link.co.kr E-mail : support@kr.dlink.com New Zealand customers Tel: 0800-900-900 24/7 Technical Support Web: http://www.dlink.co.nz E-mail: support@dlink.co.nz...
Page 43
D-Link Middle East Dubai, U.A.E. Tel: +971-4-8809022 Fax: +971-4-8809066 / 8809069 Technical Support: +971-4-8809033 General Inquiries: info.me@me.dlink.com Tech Support: support.me@me.dlink.com Egypt Technical Support Call Center: +20 2258 66777 General Inquiries: info.eg@me.dlink.com Tech Support : support.eg@me.dlink.com Kingdom of Saudi Arabia: Technical Support: +966 1121 70009 General Inquiries: info.sa@me.dlink.com...
Page 44
Обновления программного обеспечения и документация доступны на Интернет-сайте D-Link. D-Link предоставляет бесплатную поддержку для клиентов в течение гарантийного срока. Клиенты могут обратиться в группу технической поддержки D-Link по телефону или через Интернет. Техническая поддержка компании D-Link работает в круглосуточном режиме ежедневно, кроме официальных праздничных дней. Звонок...
Page 45
Офисы Россия Հայաստան Москва, Графский переулок, 14 Երևան, Դավթաշեն 3-րդ Тел. : +7 (495) 744-00-99 թաղամաս, 23/5 E-mail: mail@dlink.ru Հեռ.՝ +374 (10) 39-86-67 Էլ. փոստ՝ info@dlink.am Україна Київ, вул. Межигірська, 87-А Latvija Тел.: +38 (044) 545-64-40 Rīga, Lielirbes iela 27 E-mail: ua@dlink.ua Tel.: +371 (6) 761-87-03 E-mail: info@dlink.lv...
Page 46
Soporte Técnico Para Usuarios En Latino America Por favor revise el número telefónico del Call Center de su país en http://www.dlinkla.com/soporte/call-center Soporte Técnico de D-Link a través de Internet Horario de atención Soporte Técnico en www.dlinkla.com e-mail: soporte@dlinkla.com & consultas@dlinkla.com Clientes de Brasil Caso tenha dúvidas na instalação do produto, entre em contato com o...
Page 48
Pelanggan Indonesia Update perangkat lunak dan dokumentasi pengguna dapat diperoleh pada situs web D-Link. Dukungan Teknis untuk pelanggan: Tel: 0800-14014-97 (Layanan Bebas Pulsa) Dukungan Teknis D-Link melalui Internet: Pertanyaan Umum: sales@id.dlink.com Bantuan Teknis: support@id.dlink.com Website : http://www.dlink.co.id 日本のお客様 この度は弊社製品をお買い上げいただき、誠にありがとうございます。 製品に同梱されている保証書の購入元にお問い合わせください。...
Page 49
8. What category best describes your company? Aerospace Engineering Education Finance Hospital Legal Insurance/Real Estate Manufacturing Retail/Chain store/Wholesale Government Transportation/Utilities/Communication System house/company Other________________________________ 9. Would you recommend your D-Link product to a friend? Don't know yet 10.Your comments on this product? __________________________________________________________________________________________ __________________________________________________________________________________________...
Need help?
Do you have a question about the DXS-1210 Series and is the answer not in the manual?
Questions and answers