Save; Boot Image - D-Link DXS-1210 Series User Manual

5 Command Line Interface
Parameters
Restrictions
Example usage:
To configure the account admin password:
DXS-1210-12TC> config account username dlink privilege 15 nopassword
DXS-1210-12TC>

save

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To save the Switch's current configuration to config-1:
DXS-1210-12TC> save config-1
Success!
DXS-1210-12TC>

boot image

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To boot up the switch from image-1:
DXS-1210-12TC> boot image image-1
Success!
DXS-1210-12TC>
password.
<string <32> − The name of the user.
privilege <short <1-15> - Specify the privilege level. The value 1
is for Basic user, 12 for Operator and 15 for Administrator.
password <string <32> - Specify the password.
Only Administrator can issue this command.
To save changes in the Switch's configuration to non-volatile
RAM.
save {startup-config | config-1 | config-2}
The save command saves the configuration changes to the
memory.
{startup-config | config-1 | config-2} – Specify to save the
configuration when startup configuration. Or specify to save the
configuration to specified image.
None.
Specify to boot up the switch from which image.
boot image [image-1 | image-2]
The boot image command specifies to boot up switch from which
image.
None.
Only Administrator can issue this command.
1 0 7
1 0 7
D-Link DXS-1210 Series User Manual