Table of Contents
Advertisement
Preparing the Machine
E
Specify the location where the source files of the printer driver is stored.
If the CD-ROM drive is D, the source files of the printer driver are stored in
the following location:
• RPCS
1
D:\DRIVERS\RPCS\XP_VISTA\(Language)\DISK1
• PCL 5c (for colour printing)
D:\DRIVERS\PCL5C\XP_VISTA\(Language)\DISK1
• PCL 6
D:\DRIVERS\PCL6\XP_VISTA\(Language)\DISK1
• PostScript 3
D:\DRIVERS\PS\XP_VISTA\(Language)\DISK1
F
Check the printer driver location, and then click [OK].
G
Click [Next >].
H
Click [Finish].
If the printer driver has already been installed, plug and play is enabled, and
the icon of the printer connected to the "USB001" port is added to the [Printers]
window.
Note
❒ The number after "USB" varies depending on the number of printers con-
nected.
Windows XP, Windows Server 2003 / 2003 R2 - USB
Important
❒ Installing a printer driver requires Administrators permission. Log on using
an account that has Administrators permission.
When USB is first used, Found New Hardware Wizard starts, and USB Printing
Support is installed automatically.
If the printer driver has already been installed, plug and play is enabled, and the
icon of the printer connected to the "USB" port is added to the [Printers] window.
The printer drivers can be installed from the supplied CD-ROM provided with
this machine.
If the printer driver is not installed, follow the plug-and-play instructions of the
printer to install it from the supplied CD-ROM.
A
Connect the machine to the computer using the USB cable.
Connect the USB cable firmly.
B
In the Found New Hardware Wizard display, click [Search for a suitable driver
for my device [recommended]], and then click [Next >].
42
Advertisement
Table of Contents
