Ricoh VD4007001 Operating Instructions Manual page 35

Note
❒ To stop installation of the selected software, click [Cancel] before installa-
tion is complete.
❒ Auto Run may not work with certain operating system settings. If this hap-
pens, launch "Setup.exe" on the CD-ROM root directory.
Changing the Port Settings for SmartDeviceMonitor for Client
Follow the procedure below to change the SmartDeviceMonitor for Client set-
tings, such as TCP/IP timeout, recovery/parallel printing, and printer groups.
Windows 2000
A
Open [Printers] window from [Start] menu.
B
In the [Printers] window, click the icon of the printer you want to use. On
the [File] menu, click [Properties].
C
On the [Ports] tab, click [Configure Port].
The [Configuration] dialog box appears.
Windows XP, Windows Server 2003 / 2003 R2:
A
Open the [Printers and Faxes] window from the [Start] menu.
The [Printers and Faxes] window appears.
B
Click the icon of the machine you want to use. On the [File] menu, click
[Properties]. The printer properties appear.
C
Click the [Ports] tab, and then click [Configure Port].
The [Port Configuration] dialog box appears.
Windows Vista:
A
Open the [Printers] window from the [Control Panel].
B
Right-click the icon of the printer you want to use, and then click the [Prop-
erties].
C
Click the [Ports] tab, and then click [Configure Port].
The [Port Configuration:] dialog box appears.
Installing the Printer Driver
1
27