Multi-Function Switch - BOMBARDIER DS 250 Operator's Manual

R: Reverse
This allows the vehicle to go back-
ward. This vehicle is equipped with
a reverse speed limiter system. Re-
fer to OVERRIDE BUTTON further, for
more informations.
WARNING
Before moving vehicle in reverse,
ensure the path behind is clear of
obstacles or bystanders. Remain
seated.
N: Neutral
This position disengages the transmis-
sion to allow manual vehicle move-
ment or towing.
F: Foward
It is the normal driving range. It al-
lows the vehicle to reach its maximum
speed.

6) Multi-Function Switch

The multi-function switch is located on
the left side of the handlebar.
vmo2006-014-011
The controls located on this multi-
function switch are:
Headlamp Switch
It is located
multi-function switch.
______________________
66
on top of
Place switch to LO for the low beam
and taillight, HI for the high beam and
taillight and OFF to close the headlamp
and taillight.
vmo2006-014-055_a
1. Headlamp switch
2. Low beam position
3. High beam position
4. OFF position
Engine Stop Switch
Located on top of multi-function
switch.
NOTE: The engine will not turn if the
engine stop switch is turned to OFF
position.
This switch can be used to stop engine
and as an emergency control.
NOTE: While engine can be stopped
by turning ignition key to OFF posi-
tion, we recommend the engine be
stopped by the engine stop switch.
the
vmo2006-014-011_b
1. Engine stop switch
2. RUN position
3. OFF position