Fuel Tank Cap; Fuel Valve - BOMBARDIER DS 250 Operator's Manual

Hide thumbs Also See for DS 250:
Table of Contents

Advertisement

vmo2006-014-029_a
TYPICAL
1. Ignition switch
2. OFF position
3. ON position (position light on)
Insert key in switch and turn to ON
position. To remove key, turn key to
OFF then pull it out.
Remember that having the lights on
(headlamps and/or position light) with-
out the engine running discharges the
battery. Always turn ignition to OFF
after engine has been stopped.
NOTE: While engine can be stopped
by turning ignition key OFF, we recom-
mend the engine be stopped by the
engine stop switch.

9) Fuel Tank Cap

Unscrew counterclockwise and re-
move cap to allow fuel tank filling then
fully tighten clockwise.
NOTE: Ensure that vent tube is prop-
erly installed.
Always stop engine before re-
fueling. Open cap slowly. If a
differential pressure condition is
noticed (whistling sound heard
when loosening fuel tank cap)
have vehicle inspected and/or re-
paired before further operation.
Fuel is flammable and explosive
under certain conditions. Never
use an open flame to check fuel
level. Never smoke or allow flame
or spark in vicinity. Always work
in a well-ventilated area. Never
top up the fuel tank before plac-
ing the vehicle in a warm area.
As temperature increases, fuel ex-
pands and may overflow. Always
wipe off any fuel spillage from the
vehicle.
vmo2006-014-012_a
TYPICAL
1. Fuel tank cap

10) Fuel Valve

Located on right side of vehicle un-
der seat. 3-position rotary valve: OFF,
ON, RES. Rotate the tap to align its
pointer with ON, OFF or RES.
_____________________
WARNING
69

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents