Pole Mounted Installations - Motorola AP-6562 Installation Manual

Installation Guide
The extension arm kit can also be used in combination with the any of the brackets from the mounting bracket kit.
The following ancillary hardware to attach the extension arm to the mounting bracket kit sections is included in
the extension arm kit:
Description
1/2 inch hex head nut
1/2 inch x 3/4 inch hex head bolt

2.3.3 Pole Mounted Installations

The mounting hardware kit and extension arm can be used in various combinations to properly install the AP-6562
on a pole. For poles of up to 3 inches in diameter, attach the pole mount bracket of the mounting hardware kit at
the desired position on the pole using band clamps up to 3/4 inch width, or a 1/2 inch x 4 inch wide U-bolt and
nuts. For poles greater than 3 inches in diameter, attach the pole mount bracket using band clamps.
NOTE
Quantity
2
2
The U-bolt and band clamps are not included in the mounting bracket kit.
11