Motorola AP-6562 Installation Manual page 19

Installation Guide
NOTE
The labels for Radio 1-0, Radio 1-1, Radio 2-0 and Radio 2-1 are molded into the AP-6562 access point enclosure
beside the antenna connectors. When mounting antennas to the connectors, ensure that you have selected the
appropriate band for the configured radio. Radio 1 is a 2.4 GHz radio.
Three antenna suites are available to support 2.4 GHz band, 5 GHz band, and dual band options. Select an antenna
model best suited to the intended operational environment of your access point.
The 2.4 GHz antenna suite includes the following models:
Part Number
ML-2499-HPA8-01
ML-2499-HPA4-01
ML-2499-HPA3-01R
The 5 GHz antenna suite includes the following models:
Part Number
ML-5299-HPA5-01
ML-5299-FHPA6-01
The dual band antenna suite includes the following model:
Part Number
ML-2452-HPAG5A8-01
NOTE
For up-to-date information on supported antennas and antenna specifications, please refer to the Enterprise
Wireless LAN Antenna Specification Guide. For more information, refer to www.zebra.com/support.
If an antenna connector is unused, the open connector must be covered with an
appropriate threaded metal or plastic antenna connector cover.
Antenna Type
Outdoor rated dipole antenna; N-Male Connector 8
Outdoor rated dipole antenna; N-Male Connector 4
Outdoor rated dipole antenna; RP-BNC Male
Connector
Antenna Type
Outdoor rated dipole antenna; N-Male Connector 5
Outdoor rated dipole antenna; N-Male Connector 8
Antenna Type
Outdoor rated dipole antenna; N-Male Connector 5
Dual band antennas should only be used on Radio 2-0 and Radio 2-1 connectors.
Maximum Gain
8
Maximum Gain
Maximum Gain
19