Coolant Replacement - BOMBARDIER outlander 800 Operator's Manual

Clean drain plug area and oil level plug
then remove the gearbox drain plug.
vmo2006-007-018_a
1. Oil level plug
2. Oil drain plug
NOTE: To completely drain the gear-
box, place a jack under the left footrest
and tilt the vehicle toward the right
side. When the gearbox is empty, in-
stall the drain plug and replace the ve-
hicle on the ground.
Refill gearbox, using XP-S synthetic
chaincase oil (P/N 413 803 300) or an
equivalent.
CAUTION: Do not use other unrec-
ommended types of oil when ser-
vicing. Do not mix with other types
of oil.
The oil should be level with the bottom
of the oil level hole. Refill as required
until gearbox oil level flows through oil
level hole.
Reinstall oil level plug.

Coolant Replacement

WARNING
In order to avoid getting burned,
do not remove the radiator cap or
loosen the coolant drain plug if the
engine is hot.
Open the front access panel and re-
move the radiator cap.
_____________________
108
V07C05Y
1. Radiator cap
Unscrew the coolant drain plug and
drain the coolant into a suitable con-
tainer.
vmo2006-007-021_a
1. Coolant drain plug
2. Brake pedal
NOTE: Do not unscrew the coolant
drain plug completely.
Remove the RH side panel.
Unscrew the bleeding screw on the
top of thermostat housing.
1