Coolant Replacement - BOMBARDIER outlander max 650 efi 2006 Operator's Manual

Clean drain plug area and oil level plug
then remove the gearbox drain plug.
vmo2006-007-018_a
1. Oil level plug
2. Oil drain plug
NOTE: To completely drain the gear-
box, place a jack under the left footrest
and tilt the vehicle toward the right
side. When the gearbox is empty, in-
stall the drain plug and replace the ve-
hicle on the ground.
Refill gearbox, using XP-S chaincase
oil (P/N 413 801 900) or an equivalent.
CAUTION: Do not use other unrec-
ommended types of oil when ser-
vicing. Do not mix with other types
of oil.
The oil should be level with the bottom
of the oil level hole. Refill as required
until gearbox oil level flows through oil
level hole.
Reinstall oil level plug.

Coolant Replacement

WARNING
In order to avoid potential burns,
do not remove the radiator cap or
loosen the coolant drain plug if the
engine is hot.
Open the access panel and remove
the radiator cap.
_____________________
114
1. Radiator cap
Unscrew the coolant drain plug and
drain the coolant into a suitable con-
tainer.
vmo2006-007-021_a
1. Coolant drain plug
2. Brake pedal
NOTE: Do not unscrew the coolant
drain plug completely.
Remove the RH side panel.
Unscrew the bleeding screw on the
top of thermostat housing.