Winch Operation; Stopping The Engine; Post-Operation Care - BOMBARDIER outlander 800 Operator's Manual

V07I0EY
2WD MODE
When the selector is located on the
2WD, the vehicle is in 2 wheel drive
at all time.

Winch Operation

XT Models
See the ATV WINCH OPERATOR'S
MANUAL. This manual should be kept
in the tool kit and remain in the vehicle
at all times.

Stopping the Engine

WARNING
Avoid parking on slope.
Release throttle and completely stop
the vehicle.
Apply the parking brake by using brake
lever lock on brake lever.
Set transmission lever in PARK posi-
tion.
Push the engine stop switch in OFF
position.
Turn key in ignition switch to OFF.
______________________
88
Remove key from ignition switch.

Post-Operation Care

When vehicle is used in salt-water
environment (beach area,
ing/loading boats etc.), rinsing the ve-
hicle with fresh water is necessary to
preserve vehicle and its components.
Metallic parts lubrication is highly
recommended. Use BOMBARDIER
LUBE (P/N 293 600 016) or an equiv-
alent. This must be performed at the
end of each operating day.
When vehicle is operated in muddy
conditions, rinsing the vehicle is rec-
ommended to preserve vehicle and its
components and to keep lights clean.
NOTE: Never use a high pressure
washer to clean the vehicle. USE
LOW PRESSURE ONLY (like a gar-
den hose). High pressure can cause
electrical or mechanical damages.
launch-