Electromagnetic Environment Requirements; Anti-Lightning - Maipu MP2801 Installation Manual

MP2800 Series Router Installation Manual Version 1.0
Place the disassembled circuit board on the anti static workstation and
keep the face upturned or in the anti static bag
When viewing or removing the disassembled circuit board, touch the
edge of circuit board and avoid touching the components on the circuit
board.
Electromagnetic Environment
Requirements
The various interference sources no matter from the exterior of devices or
application systems or from the interior affect the devices through
capacitance coupling, inductance coupling, electromagnetic radiation,
public impedance (including grounding system) and lead (such as power
lines, signal lines and output lines).
Therefore, pay attention to the following:
Take anti-electric network interference for power system.
The router working place had better not be used with the grounding
settings of power devices or anti-thunder grounding settings and the
distance between them had better be as long as possible.
Be away from the strong power radio transmitters, radar transmitter,
and high frequency high-current equipments.
Take electromagnetic shielding methods when necessary.

Anti-lightning

MP2800 router takes lots of measures in anti-lightning, but when the
lightning exceeds a certain volume, the router may be damaged. To
prevent the damages caused by lightning, do as follows:
Ensure that the protect ground of the chassis is well grounded;
Ensure that the grounding point of AC power supply jack is well
grounded;
Maipu Confidential & Proprietary Information Page 38 of 55