Table of Contents
Advertisement
Part 10 Confi guring the Printer Setup
The printer has a SET UP screen that you can use to confi gure a variety of
basic settings.
To confi gure the printer setup
1. Press
.
2. Use
and
to select the SET UP item whose setting you want to change,
and then press OK.
3. Use the cursor keys to change the currently selected setting.
When this setting
is selected:
TAPE WIDTH
• Use
want to use.
DEFAULT FONT
• Use
CONTRAST
• Use
and
DENSITY
• Use
and
LANGUAGE
• Use
want to use.
cm/inch
• Use
as the unit of measurement.
4. Press OK to apply the setting.
Change its setting like this:
and
to select the tape width setting you
and
to select the font you want to use.
to adjust the display contrast.
to adjust the print density setting.
and
to select the display language you
and
to select centimeters (cm) or inches
Part 11 Reference
Cleaning the Printer Head and Roller
A dirty printer head and roller can result in poor print quality. If you have
problems with print quality, use the following procedure to clean the printer
head and roller.
To clean the printer head and roller
1. Make sure the printer is turned off.
2. Open the printer cover.
If a tape cartridge is loaded in the printer, remove it.
3. Use a cotton swab dipped in alcohol to clean the printer head and roller as
shown in the illustration.
Printer head
Never touch the print head or other metal objects near the head. These
items become very hot, and touching them creates the risk of burn
injury.
4. Replace the tape cartridge and close the printer cover.
Cleaning the Printer Exterior
Wipe the exterior of the printer with a cloth moistened with plain water.
Wring all excess liquid from the cloth before wiping the printer.
Never use benzene, alcohol, thinner, or other volatile agents to clean the
printer exterior. Doing so can damage the case.
Roller
17
EN
Hide quick links:
Advertisement
Table of Contents
