Part 9 Configuring The Printer Setup; Part 10 Reference - Casio KL-120TH User Manual

Part 9 Configuring the Printer Setup
The printer has a SET UP screen that you can use to configure a variety of
basic settings.
To configure the printer setup
1. Press .
2. Use and to select the SET UP item whose setting you want to
change, and then press OK.
3. Use the cursor keys to change it.
When this setting
is selected:
 Use
TAPE WIDTH
 Use
ALIGN
 Use
DEFAULT FONT
 Use
CONTRAST
 Use
DENSITY
ไทย
 Use and to select the display language (Thai
/ENGLISH
 Use and to select centimeters (cm) or inches
cm/inch
4. Press OK to apply the setting.
B
Change its setting like this:
and to select the tape width you
want to use.
and to select the text alignment setting
you want (LEFT, CENTER, RIGHT).
and to select the initial default font
for alpha-numeric input.
and to adjust the display contrast.
and to adjust the print density setting.
or English) you want to use.
as the unit of measurement.

Part 10 Reference

This section contains information about the Label Printer that you can use as
reference when you need it.
Using the Separately Available AC Adaptor
The separately available AC adaptor (AD-A95100) lets you print without
loading batteries into the printer.
To connect the AC adaptor
Important!
 Use only the AC adaptor specified for this printer.
1. Plug the AC adaptor plug into the AC
adaptor connection terminal of the
printer.
2. Plug the AC adaptor into a household power outlet.
To disconnect the AC adaptor
Important!
 Do not disconnect the AC adaptor from the printer while printing is in
progress. Doing so can lead to malfunction.
1. Press the printer's button to turn off power.
2. Unplug the AC adaptor from the power outlet.
3. Unplug the AC adaptor from the printers AC adaptor terminal.
21 EN