You can specify a font for the text you have just input or you can specify a
default font that is used automatically whenever you create a new label.
The font setting is applied to all of the characters. You cannot make multiple
speciﬁ cations for speciﬁ c characters.
To change the default font setting
to display the SET UP menu.
to select DEFAULT FONT and then press OK.
to select the font you want to use as the default, and then
The default font you speciﬁ ed will be used initially for all new labels.
When inputting text, you can use the procedure above to change the
font to another style, if you want.
To change the font of text you have just input
1. After inputting the text you want, press FUNC and then
to select the font you want to change to and then press OK.
This will apply the setting and return to the text input screen.
You can select from among four different character sizes: Extra large, Large,
Medium, and Small.
Examples of each are shown below.
Character size changes are applied to printed text only. The size of displayed
text does not change.
The maximum printable character size depends on the width of the tape
loaded in the printer and the number of lines of text to be printed.
The selected character size is applied to all of the characters. You cannot
make multiple speciﬁ cations for speciﬁ c characters.
To select a character size
1. Input the text.
and then press OK.
to display the size setting menu.
to move the pointer to the character size you want to use,