17
SERVICE WORK ON THE ENGINE
17.4
Removing the oil filter
Warning
Danger of scalding Engine oil and gear oil get very hot when the motorcycle is ridden.
–
Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.
–
Place a suitable container under the engine.
–
Remove oil drain plug
–
Completely drain the engine oil.
100200-10
–
Thoroughly clean the oil drain plug with magnet.
–
Mount the oil drain plug with the magnet and seal ring and tighten it.
Guideline
Oil drain plug with magnet
100201-01
with the magnet and seal ring.
M12x1.5
146
20 Nm
(14.8 lbf ft)