13
WHEELS, TIRES
Main work
–
Check the rear hub rubber dampers.
–
Check the wheel bearing for damage and wear.
»
If the wheel bearing is damaged or worn:
–
Replace the wheel bearing.
–
Remove spacer.
–
Clean and grease shaft seal ring
Long-life grease (
–
Insert the spacer.
–
H00937-11
Clean and grease the thread of the wheel spindle and nut
Long-life grease (
–
Mount the rubber damper and rear sprocket carrier in the rear wheel.
–
Position the rear wheel.
The brake linings are correctly positioned.
(
p. 106)
and contact surface
p. 186)
p. 186)
105
of the spacer.
.