11
SERVICE WORK ON THE CHASSIS
11.20
Checking/rectifying the fluid level of the hydraulic clutch
Info
The fluid level rises with increasing wear of the clutch lining disc.
Do not use brake fluid.
–
Adjust the basic position of the clutch lever to your hand size by turning adjusting
screw
.
–
When adjusting the clutch lever, make sure to leave a minimum clearance to other parts
of the vehicle.
Guideline
Minimum clearance
102009-10
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove cover
–
Check the fluid level.
Fluid level under top level of container
»
If the level of the coolant does not meet specifications:
–
Correct the fluid level of the hydraulic clutch.
Hydraulic fluid (15) (
B01956-10
–
Position the cover with the membrane. Mount and tighten the screws.
.
with membrane
.
p. 185)
5 mm (0.2 in)
4 mm (0.16 in)
87