Saving, Loading And Restoring Settings; Saving And Restoring Settings - Dalsa PC-30-02K80 User Manual

Piranha Color Camera User's Manual

3.18 Saving, Loading and Restoring Settings

Saving and Restoring Settings

Figure 8: Saving and Restoring Overview
Settings
LUT
FPN
PRNU
Factory Settings
On first initialization, the camera operates using user set 1, which has been set equal to
the factory settings. You can restore the original factory settings at any time using the
command lfs.
User Settings
You can save or restore your user settings to non-volatile memory using the following
commands. Pixel coefficients and LUTS are stored separately from other data.
To save all current user settings to Flash, use the command wus. The camera will
automatically restore the saved user settings when powered up. Note: While
settings are being written to nonvolatile memory, do not power down the camera or
the camera's memory may be corrupted.
To load the user settings from non-volatile memory, use the command lus.
To write and load the LUTs, use the wil and lil commands, respectively.
DALSA
Factory
SSN 0
03-032-10211-01
Current
Settings
LUT
FPN
PRNU
WUS LUS
WIL LIL
WFC LFC
WPC LPC
User
User
User
User
Settings
Settings
Settings
LUT
Settings
LUT
LUT
FPN
LUT
FPN
FPN
PRNU
FPN
PRNU
PRNU
PRNU
SSN 1-4
52
PC
Settings
LUT
FPN
PRNU
SSN 5
5/9/2007