Piranha Color Camera User's Manual
Note:
Example:
3.7 Data Output
Setting the Camera Link Mode
Purpose:
Syntax:
Syntax Elements:
Note:
Example:
Setting the Camera's Pixel Rate (Throughput)
Purpose:
Syntax:
Syntax Elements:
Note:
Example:
3.8 Set Color Correction
Purpose:
DALSA
Pixel readout remains the same after a direction change.
smm 0
Sets the camera's Camera Link configuration, number of Camera
Link taps and data bit depth.
clm m
m
= Base configuration, RGB, 8 bit output
5
= Base configuration, RGBY, 8 bit output
9
= Base configuration, RGBY, 12 bit output
10
= Medium configuration, 2xRGB, 8 bit output
14
= Medium configuration, RGBY, 8 bit output
15
= Medium configuration, RGBY, 12 bit output
16
•
To obtain the current data mode, use the command
gcp or get clm.
•
The bit patterns are defined by the DALSA Camera
Link Roadmap and the Camera Link Standard.
clm 5
In DALSA cameras, the sot command works in conjunction
with the clm command (see previous command) and
determines the pixel rate of the camera.
sot m
m
30 = outputs pixels RGB (triplet) or RGBY (quad) at 32
Mps
40 = outputs pixels RGB (triplet) or RGBY (quad) at 40
Mps
60 = outputs pixels RGB (triplet) or RGBY (quad) at 64
Mps
80 = outputs pixels RGB (triplet) or RGBY (quad) at 80
Mps
•
To obtain the current throughput, use the command
gcp or get sot.
•
The bit patterns are defined by the DALSA Camera
Link Roadmap and the Camera Link Standard.
•
Changes to the clm may affect this parameter.
sot 80
Sets the color correction coefficients.
03-032-10211-01
28
5/9/2007