Help - Dalsa PC-30-02K80 User Manual

Piranha Color Camera User's Manual
Example:

3.5 Help

For quick help, the camera can return all available commands and parameters through
the serial interface.
There are two different help screens available. One lists all of the available commands to
configure camera operation. The other help screen lists all of the commands available
for retrieving camera parameters (these are called "get" commands).
To view the help screen listing all of the camera configuration commands, use the
command:
Syntax:
To view a help screen listing all of the "get" commands, use the command:
Syntax:
Notes:
The camera configuration command help screen lists all commands available. Parameter
ranges displayed are the extreme ranges available. Depending on the current camera
operating conditions, you may not be able to obtain these values. If this occurs, values
are clipped and the camera returns a warning message.
Some commands may not be available in your current operating mode. The help screen
displays NA in this case.
The following help screen listing are for a 2k camera:
ccf
ccg
ccp
cil
clm
cpa
css
dil
dpc
ebc
eil
els
epc
gcl
gcm
gcp
gcs
gcv
get
gfc
gh
gil
gl
gla
gpc
DALSA
scb 75
h
gh
For more information on the camera's "get" commands, refer to
section Returning Camera Settings.
correction calibrate fpn
calibrate camera gain iti
correction calibrate prnu
calibrate input lut
camera link mode
calibrate PRNU algorithm
correction set sample
display input lut
display pixel coeffs
enable blue correction
enable input lut
end of line sequence
enable pixel coefficients
get command log
get camera model
get camera parameters
get camera serial
get camera version
get values
get fpn coeff
get help
get input lut
get line
get line average
get prnu coeff
03-032-10211-01
1-4:0-0:1024-4055
m 5/9/10/14/15/16/
mi 1/2/3/4/:1024-4055
m 1024/2048/4096/
taa 0-0:0-1023:0-1023
xx 1-2048:1-2048
i 0-1
i 0-1
i 0-2
ii 0-1:0-1
s
x NA
ta NA
xx 1-2048:1-2048
xx 1-2048:1-2048
x NA
25
5/9/2007