Dalsa PC-30-02K80 User Manual page 33

Piranha Color Camera User's Manual
Setting the Line Rate
Purpose:
i
Syntax:
Applies to
Modes 2 and 7
Syntax Elements:
Notes:
Related Commands:
Example:
Setting the Exposure Time
Purpose:
i
Syntax:
Applies to
Modes 2 and 8
Syntax Elements:
Notes:
Related Commands:
DALSA
Sets the camera's line rate in Hz. Camera must be operating in
exposure mode 2 or 7.
ssf f
f
Desired line rate in Hz. Allowable values are:
2k80: 1 to 32362 Hz
2k60: 1 to 22714 Hz
4k80: 1 to 17699 Hz
4k60: 1 to 12132 Hz
To read the current line frequency, use the command gcp or get
ssf.
If you enter an invalid line rate frequency, an error message is
returned.
Line rate reduces depending on clm, sut, els, and sah settings.
Values less than 5000 Hz will return the warning: "Warning 01:
Outside of specification>".
sem, set
ssf 10000
Sets the camera's exposure time in micro seconds. Camera must be
operating in mode 2 or 6.
set f
f
Desired exposure time in µs. Allowable range is 5.0 to
9997.000.0µs.
To read the current exposure time, use the command gcp or get
set.
The ssf and set commands will "push" each other when set.
sem, ssf
03-032-10211-01
33
5/9/2007