Adjusting A Computer Image - Barco PH series User And Installation Manual

6. Adjustments with the ADVANCED menu
2. Select SIGNAL MEMORY while AUTO is selected in the MEMORY CALL by pressing the ▲ or ▼ key.
3. Select MEMORIZE
4. Select your desired memory number by pressing the ◄ or ► key.
5. Press the ENTER key to save the memory.
- To save the new setting, select a new memory number. The memory number of the MEMORY CALL changes to a new one
after saving the setting.
- When the setting in the selected memory number is changed, the changed setting is automatically saved.
To select the saved memory by the MEMORY CALL
1. Display the SIGNAL menu.
2. Select MEMORY CALL by pressing the ▲ or ▼ key.
3. Select your desired memory number by pressing the ◄ or ► key.
- Only the memory number relevant to the input signal can be selected.
- When the same signal is input on the next time, the selected memory number is still memorized.

6.12 Adjusting a computer image

How to adjust
This projector automatically selects a proper signal format according to the type of video signal supplied from the computer. However,
video signals from the computer may not be projected correctly depending on the types of the computer and images to be projected.
In such a case, make adjustment according to the flowchart below.
62
Downloaded From projector-manual.com Barco Manuals
and press the ENTER key.
R5905597 PHXX SERIES 20/05/2014