Barco PJWU-101B User Manual
  1. Manuals
  2. Brands
  3. Barco Manuals
  4. Projector
  5. PJWU-101B
  6. User manual
Barco PJWU-101B User Manual

Barco PJWU-101B User Manual

Hide thumbs Also See for PJWU-101B:
Table of Contents

Advertisement

Quick Links

PJWU-101B
User manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PJWU-101B and is the answer not in the manual?

Questions and answers

Related Manuals for Barco PJWU-101B

Summary of Contents for Barco PJWU-101B

  • Page 1 PJWU-101B User manual...
  • Page 2 Barco nv Projection Division Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.82.11 Fax: +32 56.36.883.86 Support: www.barco.com/esupport Visit us at the web: www.barco.com Printed in China...
  • Page 3 Barco. If the purchaser or a third party carries out modifications or repairs on goods delivered by Barco, or if the goods are handled incorrectly, in particular if the systems are commissioned operated incorrectly or if, after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid.

  • Page 4: Table Of Contents

    TABLE OF CONTENTS 1. SAFETY 1.1 General considerations 1.2 Important safety instructions 2. GENERAL 2.1 Installation requirements 2.2 Unpacking the projector 2.3 Initial inspection 2.4 Projector configurations 2.5 Projector air inlets and outlets 2.6 Installation process overview 3. PHYSICAL INSTALLATION 3.1 Remote control unit (RCU) 3.2 Lenses 3.3 Connecting the projector with the power net...
  • Page 5 TABLE OF CONTENTS 5. GETTING STARTED 5.1 RCU & Local keypad 5.2 Remote Control and OSD Lite on Screen 5.3 Power on projector 5.4 Switching to standby 5.5 Power off projector 5.6 Range of effective remote control signal reception 5.7 Source selection 5.8 Changing OSD language 5.9 Adjusting the lens by horizontal and vertical lens shift 5.10 Introduction the OSD Lite on screen...
  • Page 6 TABLE OF CONTENTS 8. IMAGE 8.1 Image menu overview 8.2 Contrast 8.3 Brightness 8.4 Sharpness 8.5 Noise Reduction 8.6 Color Temperature 8.7 Input Balance 8.8 Aspect Ratio 8.9 Timings 8.10 Auto Image 9. LAYOUT 9.1 Layout menu overview 9.2 Zoom 9.3 Main Select 9.4 PIP Select 9.5 PIP Position...
  • Page 7 TABLE OF CONTENTS 11. ALIGNMENT 11.1 Alignment menu overview 11.2 Adjusting screen orientation 11.3 Rear Projection 11.4 Ceiling Mode 11.5 Lens Control 11.6 Keystone 11.7 Dynamic Contrast 11.8 Gamma 11.9 Internal Patterns Color Space 11.10 Lens To Midposition 11.11 12. CONTROL 12.1 Control menu overview 12.2 Eco Network Power 12.3 Network...
  • Page 8 TABLE OF CONTENTS 14. MAINTENANCE 14.1 Lamp Replacement 14.2 Replace the filter (for inlet Ventilation) 14.3 Clean the dust filter(for outlet Ventilation) 14.4 Cleaning the lens 14.5 Cleaning the exterior of the projector 14.6 Simple troubleshooting 15. PROJECTOR SPECIFICATION 15.1 Specifications 15.2 STANDARD SOURCE FILES 15.3 Dimension 16.

  • Page 9: Safety

    PJWU-101B projector. After this chapter, additional “warnings” and “cautions” are given depending on the installation procedure. Read and follow these “warnings” and “cautions” as well. 1.1 General considerations When referring in this document to the term “PRESENT SERIES” means that the content is applicable for following Barco products: - PJWU-101B ARNING: Ensure you understand and follow all the safety guidelines, safety instructions, warnings and cautions mentioned in this manual.

  • Page 10: Important Safety Instructions

    SONNEL, AUTHORIZED to operate professional projection systems. A PJWU-101B projector is intended "FOR PROFESSIONAL USE ONLY" by AUTHORIZED PERSONNEL familiar with potential hazards associated with high voltage, high intensity light beams, ultraviolet exposure and high temperatures generated by the lamp and associated circuits.
  • Page 11 • Do not place flammable or combustible materials near the projector! • Barco large screen projection products are designed and manufactured to meet the most stringent safety regulations. This projector radiates heat on its external surfaces and from ventilation ducts during normal operation, which is both normal and safe.
  • Page 12 If the product exhibits a distinct change in performance, indicating a need for service. • Replacement parts: When replacement parts are required, be sure the service technician has used original Barco replacement parts or authorized replacement parts which have the same characteristics as the Barco original part.

  • Page 13: General

    Observing the specification mentioned in this chapter is critical for projector performance. Neglecting this can result in loss of warranty. 2.1 Installation requirements Environment conditions Table below summarizes the physical environment in which the PJWU-101B projector may be safely operated or stored. Environment Operating Non-Operating Ambient Temperature 0 °C (32 °F) to 40 °C (104 °F)

  • Page 14: Projector Weight

    Projector weight Do not underestimate the weight of the PJWU-101B projector. The projector weights about ±33 kg (±72.75lb.) without lens. Be sure that the pedestal or ceiling mount on which the projector has to be installed is capable of handling five (5) times the complete load of the system.

  • Page 15: Initial Inspection

    Save all packing material until the inspection is completed. If damage is found, file claim with carrier immediately. The Barco Sales and Service office should be notified as soon as possible.

  • Page 16: Projector Configurations

    This check should confirm that there are no broken knobs or connectors, that the cabinet and panel surfaces are free of dents and scratches, and that the operating panel is not scratched or cracked. The Barco Sales and Service office should be notified as soon as possible if this is not the case.

  • Page 17: Positioning The Projector

    Off-Axis projection is obtained by shifting the lens up, down, left or right. Several parameters can be calculated determining the position in any installation. Formula to calculate the distance CD for On-Axis projection: CD = SH/2 + B - A PJWU-101B 17/10/2014...
  • Page 18 Side to side tilt, however, must not exceed ±10°. This limit ensures that the lamp in the projector operates properly and safely. 10° 10° ±15° ±15° 10° 10° Tilting allowed without problems No tilting allowed in this area No tilting allowed in this area PJWU-101B 17/10/2014...

  • Page 19: Projector Air Inlets And Outlets

    2.6 Installation process overview Quick setup The following steps describe briefly how to setup your PJWU-101B projector in a table mount front projection. Note that each step refers to a corresponding procedure, which is more detailed and illustrated. 1. Install the batteries of the remote control. See page 12: 3.1 Remote control unit (RCU)

  • Page 20: Physical Installation

    • If the infrared receiver is exposed to fluorescent lamp or strong sunlight, the remote control may not operate normally. • Refer to the regulations enforced by your local government on the disposal of used batteries; improper disposal could damage the environment. PJWU-101B 17/10/2014...

  • Page 21: Remote Control Overview

    "home" move through menu press "arrow keys" select button press "ok" select and return to previous menu press "ok" return to previous menu without press "home" selecting clear OSD Lite of screen press "home" PJWU-101B 17/10/2014...

  • Page 22: Lenses

    3.Physical Installation 3.2 Lenses Available lenses for the PJWU-101B projector projector • R9832760 : J lens (1,85-2,4 : 1) - Standard Lens • R9832761 : J lens (1,56-1,86 : 1) - Short Throw Lens • R9832762 : J lens (2,4-4,0 : 1) - Longer Zoom lens • R9832763 : J lens (0,84-1,03 : 1) - Extreme Wide Angle Lens...
  • Page 23 HOME on the projector panel, Choose OSD -> LENS ZOOM , then use the buttons to adjust the size of the image that is projected onto the screen. Original image size Zoom out Zoom in PJWU-101B 17/10/2014...
  • Page 24 The distance of horizontal lens movement is 30% of half the screen width in both directions. For instance, if you are using a 80" × 50" screen, you will be able to move the image left or right by no more than 12". This illustration shows normal horizontal lens shift without the use of special specification lens or projector. PJWU-101B 17/10/2014...

  • Page 25: Connecting The Projector With The Power Net

    3. Connect the female side of the power cord with the power input socket of the projector . 4. Secure the power plug by locking the plug holder clamp. VOLTAGE AC POWER SWITCH AC MAINS 交流電源選擇 交流電源開關 交流電源輸入     VOLTAGE AC POWER SWITCH AC MAINS 交流電源選擇 交流電源開關 交流電源輸入 Connect to Wall plug PJWU-101B 17/10/2014...
  • Page 26 To avoid thermal stress that can lead to premature lamp failure, never unplug the power cord while the lamp cooling fans are running. Never unplug the power cord to power down the projector, first switch off the power switch and then unplug the power cord. PJWU-101B 17/10/2014...

  • Page 27: Alignment Of A Table Mounted Projector

    3. Turn the adjustable feet in or out until the projected hatch pattern has a perfect rectangle shape and is leveled. When this is achieved, the projector is set horizontal and vertical at right angles to the screen. Angle adjustment Angle adjustment PJWU-101B 17/10/2014...

  • Page 28: Mounting The Ceiling Mount

    3. Insert a bolt in each corner and turn in these bolts. Mounting bracket screw 3 holes of M8*15 Mounting bracket screw 6 holes of M6*15 125.50 152.50 Ote: Two holepatterns are available for ceiling mounting: M6x15(6pcs) or M8x15(3pcs) Please check your support system for compatability. PJWU-101B 17/10/2014...

  • Page 29: Projector Parts And Functions

    Use these buttons to scroll, shut down the projector configure or adjust items on the OSD or toggle between different images. Press this button to confirm selection of OSD item; you can choose from "Select Item" or access "Sub Menu" configurations. PJWU-101B 17/10/2014...

  • Page 30: Input And Communication

    The communication interface of the PJWU-101B projector supports RS232 serial communication. You can use the RS232 input to connect a local PC to your PJWU-101B projector. By this way you can configure and control your PJWU-101B projector from your local PC.
  • Page 31 HDCP compatible digital image input; connects to sources using HDMI or DVI. 7. VGA Standard 15-pin VGA connection socket to connect to RGB, high-definition component input or PC.The projector will automatically detect the resolution of the input signal. PJWU-101B 17/10/2014...

  • Page 32: Status Lights Of Led

    The LED indicator is blinking at a 0.25 second interval when there is error occurred in projector. Please contact authorized service personnel for help. During start-up The LED indicator is blinking at a 2 seconds interval when the projector power on. 1 sec 1 sec 1 sec 1 sec 1 sec OFF/Standby Error During Start-Up PJWU-101B 17/10/2014...

  • Page 33: Connecting The Projector To Other Devices

    12V Trigger output as illustrated.After you have done so, Your screen will lower automatically whenever you turn on your projector for your convenience. Retractable screen or other 12V device Sleeve = Ground Tip = +12V PJWU-101B 17/10/2014...
  • Page 34 Connect your PC or other devices with VGA output to the VGA input connectors on the projector to be used as the source of image input. Desktop or Notebook Raccordé à la prise murale B/Pb R/Pr AC POWER AC MAINS SWITCH 100-240 Volts 50/60Hz Desktop or Notebook PJWU-101B 17/10/2014...
  • Page 35 If the projector is unable to pick up the IR signals from the remote controle due to distance or obstacles (i.e. wall or cabinet doors), you can connect an external IR repeater to the projector’s IR INPUT jack to extend the effective signal reception range. Remote control IR sensor IR repeater PJWU-101B 17/10/2014...

  • Page 36: Component Connection

    4. Input & Communication COMPONENT connection Take the 3/5 cabled RGB component video connectors from the source equipment to the projector’s YUV1 or RGBHV/YUV2 jacks. DTV set-top-box or other compo- (YPbPr) nent (YPbPr) input source PJWU-101B 17/10/2014...

  • Page 37: Getting Started

    "ok" the menu of the desired function will appear the main menu will be displayed or when you are leave the menu or clear the screen press "home" in the main menu the screen will be cleared PJWU-101B 17/10/2014...
  • Page 38 (default setting = ENGLISH) > show lamp info > show lamp mode > go to lamp mode desired (default setting = NORMAL) > show projector info > enter advanced menu > Use the password ""to enter the advanced menu > PJWU-101B 17/10/2014...

  • Page 39: Power On Projector

    2. Let cool down the projector until the fan speed decreases. At least 5 minutes. 3. Switch off the projector with the power switch. ’0’ must be pressed. AUTION: Never switch off the projector while the message ’Saving data ... ’ is displayed ! PJWU-101B 17/10/2014...

  • Page 40: Range Of Effective Remote Control Signal Reception

    Avoid placing the remote control at places of high temperature or humidity as it could cause the remote control to malfunction. 5.7 Source selection Press on the remote control to activate OSD Lite on Screen, then select " " for the desired source. Or press on the keypad to select the input source. INPUT PJWU-101B 17/10/2014...

  • Page 41: Changing Osd Language

    5.9 Adjusting the lens by horizontal and vertical lens shift Via the remote control directly Press the button on the remote control, then select " " , use the buttons to adjust the horizontal or vertical position of the lens. PJWU-101B 17/10/2014...

  • Page 42: Introduction The Osd Lite On Screen

    45: 8.8 Aspect Ratio . Advance LENS FOCUS This function is for futher adjust the projector. For Use this fuction to adjust the image from fuzzy to clear. professional use. Refer to page 35: 6. ADVANCED OSD MENU PJWU-101B 17/10/2014...

  • Page 43: Advanced Osd Menu

    Projector Keypad to call the Basic OSD Lite on screen. Select the “ADVANCED” and press the password then the screen will show the advance OSD as below: The password for the advanced OSD is  PJWU-101B PJWU-101B 17/10/2014...

  • Page 44: How To Navigate In The Advanced Menu Structure

    When restarting the projector from stand-by, the menu memory is reset. After re-opening the main menu and selecting an item, the previous selected sub item of that selected item is highlighted and can be opened just by pressing or OK. PJWU-101B 17/10/2014...

  • Page 45: Input

    Black White Auto Image Auto Adjust Always Each input module must be configured before these module can be used. This configuration is necessary so that the projector knows which type of signal is connected to its input. PJWU-101B PJWU-101B 17/10/2014...

  • Page 46: Input Selection

    The default setting, Auto, functions as follows: AUTO The Auto setting determines the correct color space to use. If it does not, you can force the PJWU-101B to use a specific color space. Choose one of the following: • Auto(default) • YUV-HD...

  • Page 47: Auto Power Off

    7.8 Auto Image Adjust You can configure the Auto Image Adjust function to one of the following three modes: Off =NEVER Auto =When not done before(or when done first time) Always =When new source selected or new source connected. PJWU-101B 17/10/2014...

  • Page 48: Image

    Green Gain Blue Gain 16:10 16:9 Aspect Ratio 1.88 2.35 Letterbox Native Unscaled H Total H Start Timings H Phase V Start Auto Image Execute Depending on the type of the connected source, some settings are grayed out PJWU-101B 17/10/2014...

  • Page 49: Contrast

    Contrast and Brightness are interrelated options that affect one another; when you adjust one of them, you might have to fine tune other settings to get the best projection results. The following image illustrates the results of direct brightness adjustment using a random image: Reduced brightness Original image Enhanced brightness PJWU-101B 17/10/2014...

  • Page 50: Sharpness

    The projector’s default color temperature is set at Native. As color temperature rises, the image will appear to be more blue; as it decreases, the image will appear redder.When you choose “Native”, the projector will disable the white adjustment function of the input device. PJWU-101B 17/10/2014...

  • Page 51: Input Balance

    One can conclude here that a good data conversion can only be met by using three previously (input) balanced color signals The objective of input balancing The objective in input balancing is to “set” the same black level and the same white level for the three colors of a particular input source. PJWU-101B 17/10/2014...

  • Page 52: Adjusting The Input Balance

    Generally speaking, as gain increases, the contrast of the image will become lower.By increasing the offset, the image brightness will become lower. PJWU-101B 17/10/2014...

  • Page 53: White Balance

    The projector’s full image size is 16:10 (1920×1200 dots).The following diagram illustrates the difference in various aspect ratio settings: Native input Output aspect ratio Output aspect ratio Output aspect ratio 16:10 16:9 Output aspect ratio Output aspect ratio Output aspect ratio Output aspect ratio 1.88 2.35 Letterbox Native PJWU-101B 17/10/2014...

  • Page 54: Timings

    The following image is an example of test image from an external signal source:  Adjust image quality by changing the value of horizontal total to smoothen the image. In order to adjust timings the pattern should be used is pixel (on/off) PJWU-101B 17/10/2014...

  • Page 55: Auto Image

    By executing this function, the projector will resync the image. Use this function when the image source is unstable or when you notice deterioration in image quality and the projector will automatically adjust the image size, phase and timing. (The adjustment also applies to PIP input source). PJWU-101B 17/10/2014...

  • Page 56: Layout

    • PIP Position • PIP 9.1 Layout menu overview Zoom Crop Zoom HDMI1 HDMI2 Main Select YUV1 RGBHV/YUV2 HDMI1 LAYOUT HDMI2 PIP Select YUV1 RGBHV/YUV2 Top Left Top Right PIP Position Botton Left Botton Right Split L-R On, Off PJWU-101B PJWU-101B 17/10/2014...

  • Page 57: Zoom

    9.3 Main Select When you want to project PIP image, use this function to specify the image source for the PIP image. This function is identical to Input Selection; for more information, please refer to page 38: 7.2 Input Selection PJWU-101B 17/10/2014...

  • Page 58: Pip Select

    Refer to the following main and PIP source matrix for a valid main and PIP source selection when PIP is ON. Main select Pip/main source availability RGBHV/ HDMI1 HDMI2 YUV1 YUV2 HDMI1 HDMI2 YUV1 RGBHV/YUV2 Source availabe source not availabe PJWU-101B 17/10/2014...

  • Page 59: Lamp

    • Lamp1 and Lamp2 Run Time display • Lamp Performance 10.1 Lamp menu overview Mode Normal Power Single LAMPS Dual High Altitude Mode Power 77.3% - 100% LAMPS Lamp1 Status Lamp2 Status Lamp1 Run Time XX HRS Lamp2 Run Time XX HRS 91.4 PJWU-101B 17/10/2014...

  • Page 60: Mode

    The projector will automatically determine the usage hours for lamp1 and lamp2 and choose the lamp with lower hours for the operation. • Dual When you require brighter image from the projector, please operate the projector with Dual lamps. Lamp2 Lamp1 PJWU-101B 17/10/2014...

  • Page 61: High Altitude Mode

    This function is limited to display purposes to inform the user of Lamp2's total run time. 10.10 Lamp Performance It is suggested that the projector should stay a runtime at least 30 minutes or longer to ensure the Lamp Performance. PJWU-101B 17/10/2014...

  • Page 62: Alignment

    • Color space select • Setup lens to midposition 11.1 Alignment menu overview Rear Projection Ceiling Mode Zoom Lens Control Focus Shift V/H Keystone Enter Dynamic Contrast ALIGNMENT Gamma 2.35 S-Curve Internal Patterns Native Color Space Custom Lens To Execute Midposition PJWU-101B 17/10/2014...

  • Page 63: Adjusting Screen Orientation

     Advanced ALIGNMENT  Ceiling Mode and choose ON Correct Picture canoe   11.3 Rear Projection The default of the Rear Projection setting is Off. See 11.2 Adjusting screen orientation, refer to page 55: 11.2 Adjusting screen orientation PJWU-101B 17/10/2014...

  • Page 64: Ceiling Mode

    Use this function to configure the projector to automatically adjust image contrast from the source upon start up or shut down. When activated, the projector will dynamically adjust the image contrast from the beginning of the projection until the content has ended. PJWU-101B 17/10/2014...

  • Page 65: Gamma

    Choose this to customize the color gamut according to your preference through projector Toolset application. 11.11 Lens To Midposition After series of lens shift operations, this function can be used to return the lens to the center position. PJWU-101B 17/10/2014...

  • Page 66: Control

    Menu Position Botton Left Botton Right Center Start Up Logo Start Up Chime Trigger 1 CONTROL 16:10 16:9 1.88 2.35 Letterbox Trigger 2 Native Auto Auto Source English French Spanish German Language Chinese Simplified Japanese Korean Russian Turkish PJWU-101B 17/10/2014...

  • Page 67: Eco Network Power

    Toolset application. To control the projector via network, please connect to the projector via a web browser with the IP address shown on the Advanced menu CONTROL —> Network. The home page will be displayed as follows. PJWU-101B 17/10/2014...

  • Page 68: Subnet Mask

    You can use this function to designate which area on the image the OSD Menu will appear. As you can see from the diagram below, there are five positions where you can choose to have the OSD Menu displayed.The default setting is “Center”. Top Right Top Left Center Bottom Left Bottom Right PJWU-101B 17/10/2014...

  • Page 69: Start Up Logo

    13.Service 12.5 Start Up Logo You can use this function to have the projector display the Barco logo in the start up screen. Set to display the Barco logo during start up and to display a blank image. 12.6 Start Up Chime Set it to On to have the projector play a sound effect during start up;...

  • Page 70: Service

    H/V Refresh Rate Lamp1 Run Time Lamp2 Run Time SERVICE Lamp1 Hour Reset Lamp Hour Reset Lamp2 Hour Reset Projector Run Read-only Time information Blue Only The command will be executed after Factory Reset confirmation in the prompt dialog PJWU-101B 17/10/2014...

  • Page 71: Service Message Of The Projector

    This function will not apply to items including no signal, network, Projector control, startup Logo, language, High Altitute mode and lamp hours When Factory Reset is executed, all source memories created by the projector (i.e. timings files) will be erased PJWU-101B 17/10/2014...

  • Page 72: Maintenance

    300°C). If you attempt to replace the lamp without allowing the projector to cool, you could risk scalding yourself. This is why you should wait for no less than 60 minutes for the lamp to cool down in order to perform the replacement safely. 2. Loosen the lamp cover. 3. Take out the lamp cover. PJWU-101B 17/10/2014...
  • Page 73 6. Insert the new lamp in the direction shown in the illustration into the lamp assembly; tighten the two screws using a screw diver and make sure the lamp is firmly secured to prevent the lamp from shaking or poor contact. 7. Replace the lamp cover and firmly secure the four screws on the lamp cover. PJWU-101B 17/10/2014...

  • Page 74: Replace The Filter (For Inlet Ventilation)

    New filter (available kit : R9899730, contains 4 high density filters) AUTION: Never clean the filter Always replace with a new one. How to change the filter in the Right side. 1. Loosen the six screws on the projector right side cover. PJWU-101B 17/10/2014...
  • Page 75 14.Lamp and Filter Maintenance 2. Take out the old filter. 3. Insert new filter. Black side White side 4. Tighten the six screws of right side cover. PJWU-101B 17/10/2014...
  • Page 76 How to change the filter in the Left and Front side. 1. Loosen the six screws on the projector left side cover. 2. Take out the old filter(left and front). 3. Insert new filter. Lado negro Lado blanco PJWU-101B 17/10/2014...

  • Page 77: Clean The Dust Filter(For Outlet Ventilation)

    5. Do not leave the cleaning cloth in either an open room or lab coat pocket, as doing so can contaminate the cloth. 6. If smears occur when cleaning lenses, replace the cloth. Smears are the first indication of a dirty cloth. PJWU-101B 17/10/2014...

  • Page 78: Cleaning The Exterior Of The Projector

    1. The image brightness, contrast, color and 1. Adjust the image brightness, contrast, tint might need proper adjustment. color and tint. The picture looks dim 2. The lamp is due for replacement. 2. Replace the projector lamp. PJWU-101B 17/10/2014...
  • Page 79 LED indicator on the rear panel of the life; please replace it. picture disappears. projector and see if it is blinking in red. 2. The lamp does not turn on even when the projector has been turned on. PJWU-101B 17/10/2014...

  • Page 80: Projector Specification

    3 years standard warranty** * Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. **Warranty and service conditions can differ from region to region. Contact your local sales or service representative for more details. PJWU-101B 17/10/2014...

  • Page 81: Standard Source Files

    74.54 SECAM SECAM (M) RGBS 1440x480i SDTV 1440x576i 480i 59.94 576i 480p 59.94 EDTV 576p 1035i 1080i 1080i (Aus) 1080i 59.94 1080i 720p 720p 59.94 720p HDTV 1080p 23.98 1080p 1080p 1080p 29.97 1080p 1080p 1080p 59.94 1080p PJWU-101B 17/10/2014...

  • Page 82: Dimension

    15.Projector Specifications 15.3 Dimension 530mm 670mm 265mm PJWU-101B 17/10/2014...

  • Page 83: Environmental Information

    Mercury Notice This Barco product consists of materials that may contain mercury, which must be recycled or disposed of in accordance with local, state, or country laws: Within this system, the lamp in the projector contains mercury.
  • Page 84 16.Environmental information 本产品中包含的有毒有害物质/成分的名称和含量。 PJWU-101B 17/10/2014...

  • Page 85: Production Address

    16.Environmental information 16.3 Production address Factories Barco nv Entertainment Division Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.82.11 Fax: +32 56.36.883.86 Support: www.barco.com/esupport Visit us at the web: www.barco.com PJWU-101B 17/10/2014...

Table of Contents