Barco PH series User And Installation Manual page 57

Item
LAMP 2 TIME (LOW)
NEXT LAMP RELAY
FILTER TIME
SERIAL NUMBER
INPUT
RESOLUTION
VERTICAL FREQUENCY
HORIZONTAL
FREQUENCY
SYNC. TYPE
• NEXT LAMP RELAY isn't displayed when LAMP RELAY is OFF or LAMP SELECT is LAMP 1 or LAMP 2 in the INSTALLATION
1 menu.
R5905597 PHXX SERIES 20/05/2014
Downloaded From projector-manual.com Barco Manuals
Description
This item shows the lamp operation time calculated based on that the LAMP MODE of LAMP
2 is LOW.
→ When the LAMP MODE is STANDARD, this item shows a longer lamp operating time than
the actual time.
→ When the lamp operating time is 0 to 10 hours, "0H" is displayed. The lamp operating time
exceeding 10 hours is indicated by the actual hours.
→ When the lamp operating time reaches 3000 hours, the bar turns to yellow. When it reaches
3800 hours, the bar turns to red.
→ The icon displayed to the right of the bar shows the lamp status. Yellow: On, Red: End of lamp
life or error such as illumination failure, Black: Off
The next lamp relay time is displayed.
The filter operation time is displayed.
The serial number of the projector is displayed.
Indicates the name of the terminal to which the currently projected video signal is being input.
Indicates the resolution of the currently projected video signal.
Indicates the vertical frequency of the currently projected video signal.
Indicates the horizontal frequency of the currently projected video signal.
Indicates the type of the sync signal for the currently projected video signal.
5. Advanced menu
53