6. Adjustments with the ADVANCED menu
WXGA signal
1280 x 800
(16:10)
WXGA signal
1280 x 768
(16:9.6)
•
In such cases as when you keep projecting images in the narrower area than the screen for a long time and then change the
mode to FULL, the masking areas may remain as afterimage around the displayed image. Consult your dealer in this case.
•
If you change the screen setting, the aspect setting is automatically changed to NORMAL. Therefore, in such a case, set the
desired aspect ratio again.
For PHXG-91B:
When SCREEN is 4:3:
Input signal
XGA signal
1024 x 768
(4:3)
WXGA signal
1280 x 800
(16:10)
1080p signal
1920 x 1080
(16:9)
•
When a 16:9 image is kept displayed for a long time before displaying FULL image, the afterimages of the black bars may
appear on the FULL image screen. Consult your dealer in this case.
•
If you change the screen setting, the aspect setting is automatically changed to NORMAL. Therefore, in such a case, set the
desired aspect ratio again.
6.10 Adjusting the detailed setting of ASPECT
How to adjust
1. Display the SIGNAL menu.
2. Select ASPECT by pressing the ▲ or ▼ key.
3. Press the ◄ or ► key to select USER
60
Downloaded From projector-manual.com Barco Manuals
16:10
16:9
1280 x 800
1280 x 720
16:9.6
16:9
1280 x 768
1280 x 720
Setting
NORMAL
Input video signal is displayed
at the max height (768 pixels) or
max width (1024 pixels) of the
panel while its aspect ratio is
maintained.
4:3
1024 x 768
16:10
1024 x 640
16:9
1024 x 576
.
16:10
4:3
1280 x 800
1066 x 800
16:9.6
4:3
1280 x 768
1066 x 800
16:9
Regardless of the type of input
signal, image is displayed at 16:9
aspect ratio (1024 x 576 pixels).
Select to expand squeezed (or
horizontally compressed) images
such as DVD images to 16:9.
16:9
1024 x 576
16:9
1024 x 576
16:9
1024 x 576
R5905597 PHXX SERIES 20/05/2014
16:10
1280 x 800
16:10
1280 x 800
FULL
Regardless of the type of input
signal, image is displayed at
the full panel size (1024 x 768
pixels).
4:3
1024 x 768
4:3
1024 x 768
4:3
1024 x 768