Ricoh MET-C1 Field Service Manual page 603

SC No. Level
* Do not format an SD card supplied with the main machine or sold as an option. You may only format SD
cards used for Firmware Update by a Customer Engineer.
SC No. Level
SC868-02 D
Error Name/Error Condition/Major Cause/Solution
SD card that starts an application
• Turn the main power off and check the SD card insertion status.
• If no problem is found, insert the SD card and turn the main
power on.
• If an error occurs, replace the SD card.
• SD card for users
• In case of a file system error, reformat the SD card (using the
"SD Formatter" made by Panasonic).*
• In case of a device access error, turn the main power off and
check the SD card insertion status.
• If no problem is found, insert the SD card and turn the main
power on.
• If an error occurs, use another SD card.
Error Name/Error Condition/Major Cause/Solution
SD card access error
The SD controller returned an error during operation.
(Error occurred at the mount point of /mnt/sd1)
• SD card defective
• SD controller defective
Service Call 816-899
601