Specifications - Merlin MT50EVO Installation And Operating Instructions Manual

32
SPECIFICATIONS - EntryLift - MT50EVO
Input Voltage...........230-240 Vac, 50 Hz
Max. Pull Force ......500 N
Power .....................80 Watt
Standby Power .......0.8 Watt (door fully closed)
Normal Torque ........4 Nm
Max door weight......60 kgs Spring balanced
Max door area.........Sectional door 13.0 m
2
Motor
Type........................DC gearmotor permanent lubrication
Noise level ..............55 db at 1 metre
Drive Mechanism
Drive .......................Chain with one-piece trolley on
steel rail.
Length of Travel......2.5 m
Courtesy light..........8 LEDs
Light on Time..........3 min
Door Linkage ..........Adjustable door arm. Pull cord trolley release.
Safety
Personal .................Push button stop in UP and DOWN direction. Automatic safety reverse in both UP and DOWN direction.
Electronic................Automatic force adjustment
Electrical .................Transformer overload protector and low voltage push button wiring.
Limit Device ............Mechanical Passpoint/RPM sensor
Limit Adjustment .....Electronic
Soft-start/Soft-stop
Dimensions
Length (Overall).......3.45 m
Headroom Required 32 mm
Hanging Weight .......10 kg
Receiver
Memory Registers ...16 handset codes
1 keypad code
Operating
Frequency.................433.30/433.92/434.54 MHz
20