Specifications - Merlin Commander Elite MS105MYQ Installation And Operating Instructions Manual

37
SPECIFICATIONS - COMMANDER ELITE - MS105MYQ
Input Voltage.............................220 - 240 Vac, 50 - 60 Hz.
Max. Pull Force ........................1000 N.
Power .......................................225 Watt.
Standby Power .........................0.8 Watt (door fully closed).
Normal Torque ..........................7 Nm.
Max door weight.......................150 kg.
Max lift under spring tension ....20 kg.
Max door area...........................Sectional Doors Tilt Doors 20 m
Motor
Type..........................................DC gearmotor permanent lubrication.
Noise level ................................54 db at 1 metre.
Drive Mechanism
Drive .........................................Belt with one-piece trolley on steel rail.
Length of Travel........................Adjustable to 3.0 m.
LED light ...................................25 Watt equivalent.
Door Linkage ............................Adjustable door arm. Pull cord trolley release.
Safety
Personal ...................................Push button stop in UP and DOWN direction. Automatic safety reverse in both UP
Electronic..................................Automatic force adjustment.
Electrical ...................................Transformer overload protector and low voltage push button wiring.
Limit Device ..............................Mechanical Passpoint/RPM sensor.
Limit Adjustment .......................Electronic.
Soft-start/Soft-stop
Dimensions
Length (Overall)........................3.24 m.
Headroom Required .................30 mm.
Hanging Weight ........................12 kg.
Receiver
Memory Registers ....................64 handset codes.
Operating
Frequency.................................433.30/433.92/434.54 MHz.
Warranty Registration
To validate your warranty you must complete
TM
Trademark of The Chamberlain Group, Inc.
® Registered Trademark of The Chamberlain Group, Inc.
© 2019, The Chamberlain Group Inc.
and DOWN direction.
4 keypad devices - 1 code each.
the registration form online at:
gomerlin.com.au/warranty
gomerlin.co.nz/warranty
2 .
or
22