Grundig GV 900 SV/1 Servise Manual page 15

SETTINGS
____________________________________________________________________________________
COUNTRY 4
Select the country (place of installation) using the »
A I
B N If the country you require is not given in the table, select the »OTHERS« line.
DK P
FIN E Confirm your selection with the »
D S
NL CH
OTHERS
5
A table asking you whether the aerial cable or the EURO-AV cable has been
connected to the video recorder appears.
: SELECT
OK :ENTER INFO:EXIT
Press » OK« to go to the next setting.
6
The »SAT RECEIVER« table appears on the picture screen.
SAT RECEIVER
If no satellite receiver equipped with a SAT control socket is connected to the
SAT CONTROL ON OFF
video recorder, select the »SAT CONTROL OFF« setting using the »
» « button then continue with step
E E
If a satellite receiver equipped with a SAT control socket is connected, use the
» « or » « button to select the »SAT CONTROL ON« setting.
F F E E
– A table asking you to connect the satellite to the video recorder appears on
:CHANGE
the picture screen.
OK :ENTER INFO:EXIT
7
Press the » OK« button to start the automatic tuning system.
1 C 02
– The recorder searches all channel numbers for TV stations, then sorts and
AUTOMATIC SORTING. stores them. This can take several minutes.
PLEASE WAIT.
– When the search is completed, the table »MOVE« appears on the
. . . . . . . . . . . . . . . . . . . . . . . picture screen.
Note:
You can sort the found TV channels to suit your taste.
INFO:EXIT
If the order of the TV channels is already to your taste, continue with step 10.
8
Use the »
C D C D F F E
MOVE 1/5
1ARD 17C23 13
mark it with the »
2ZDF 18C24 14
3RTL1 19C31 15
4RTL2 10C47 16
9
Use the »
C D C D F
F E
5SAT1 11 17
6PRO7 12 18 programme position then confirm with the »OK« button.
If you wish to sort further TV channels, repeat the steps
: SELECT
OK :ENTER INFO:EXIT
10
End the setting with the »
Note:
Further settings such as manual channel search, changing the order of the
channels at a later date, clearing TV channels from the station table, or
assigning station names are described from page 31.
« buttons.
C D C D F
F E E
OK « button.
« or
F F
7
.
« buttons to select the channel you wish to move then
E
OK
« button.
« buttons to move the marked channel to the desired
E
8 and 9.
i INFO
« button.
englisch • English • anglais
SPECIAL SETTINGS
_____________________________________________________________________
Channel programming with the manual tuning
system or by entering the channel numbers manually
If you do not know the channel/special channel numbers of the TV stations you
wish to programme, or if the recorder could not find a TV station with the help of
the automatic tuning system, you can use the manual search for programming.
If you know the channel/special channel numbers of the TV stations you wish to
programme, you can enter this data also directly.
Preparation
Switch the TV set on.
Select the »AV« programme position for video playback on the TV set.
Setting
1
Call up the main menu with the »
2
Select the » INSTALLATION « line using the »
te it with the »OK« button.
3
Select the » CHANNEL PRESET « line using the »
activate it with the »OK« button.
4
Activate the » MANUAL TUNING« line with the »OK« button.
– The table for channel programming appears on the picture screen.
The »PRESET« line is marked.
PRESET ARD 1
5
Use the » 0... 9« buttons to select the programme position on which the new
CHANNEL C 06
FINE TUNING
TV channel is to be stored.
DECODER ON OFF
SKIP ON OFF
6
Select the » CHANNEL« line using the »
7
Start the channel search with the »
:SELECT :CHANGE
– The channel search is stopped as soon as a TV channel is found,
OK :ENTER INFO:EXIT
or
enter the channel number with two digits using the
Use the »MONITOR« button to toggle between normal channels
(display: »C«) or special/hyper channels (display: »S«).
8
If finetuning is required, select the » FINETUNING« line with the »
» « button then use the »
D D
9
Store the setting for this programme position with the »OK« button.
If you wish to programme further channels, repeat the steps
10
End channel programming with the »
i INFO« button.
« or » « button then activa-
C C D D
« or » « button then
C C D D
« or » « button.
C C D D
« or » « button.
F F E E
»0 ... 9« buttons.
« or
C C
« or » « button for finetuning.
F F E E
5 to 8.
i
INFO « button.