Tektronix PHASER 560 Service Manual page 89

Downloaded from www.Manualslib.com
Follow these guidelines when you make transparencies:
Use only Tektronix transparencies .
When using the tray, load the transparencies so that the notched end
of the transparency is in the lower-right corner of the tray. The
notched end should be next to the load level decal inside the tray, near
the paper backstop. The notched edge should form the trailing edge
of the print as it is processed through the printer.
When using multi-purpose tray feed, insert the transparency film so
that the notched end is away from the media level arrows label inside
the tray. The notched end should form the trailing edge of the print.
Show where this is explained in the user manual.
Explain to the customer not to re-use media that has been processed through or
jammed inside the printer; damage to the printer may result.
Double-sided printing: Use only high-quality laser paper that is smooth on
both sides and features high opacity.
Fusing a sheet of paper has a drying affect on the paper. For best reliability, the
lighter side (the side with less toner) of a two-side print should be printed first.
There is a higher chance of paper misfeed when printing the second side.
Ensure that the prints to be duplexed are uniformly stacked, keeping the paper
flat and edges even. For best results, print the second side from the multi-purpose tray
using "paper - second side" driver settings .
Place the printed side up in the tray and the end that came out of the print fist
under the hooks of the paper tray.
Printing on both sides of a piece of paper counts as two printed pages. In
addition, duplex printing causes a slight reduction in the life of the fuser and the
imaging unit because the printed media is not as smooth and clean as imprinted
media. Because of this, customers may see an increase in mis-picks, mis-feeds
and the need for cleaning the printer's pick rollers.
Multi-purpose tray: Demonstrate using the multi-purpose tray.
Show how the printing side faces up.
Show how to load specialty media such as envelopes, OHP and T-shirt
transfer material.
Show where use the multi-purpose tray is explained in the user
manual.
manuals search engine
4
Key Operator Training
4-3
Service Manual