[Startup Logo]; [Shutter Setting] - Panasonic PT-EZ590 Operating Instructions Manual

f [SCREEN POSITION] cannot be selected or adjusted when [SCREEN FORMAT] is set to the following
item.
PT-EZ590, PT-EW650 and PT-EW550: [16:10]
PT-EX620 and PT-EX520: [4:3]
6) Press qw to adjust the [SCREEN POSITION].
f The items will switch each time you press the button.
r When [SCREEN FORMAT] is [16:9]
[CENTER]
[HIGH]
[LOW]
r When [SCREEN FORMAT] is [4:3]
(Only for PT-EZ590)
[CENTER]
[LEFT]
[RIGHT]

[STARTUP LOGO]

Set the logo display when the power is turned on.
1) Press as to select [STARTUP LOGO].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT LOGO]
[USER LOGO]
[OFF]
Note
f The startup logo will disappear in approximately 30 seconds.
f To create/register the [USER LOGO] image, use "Logo Transfer Software" included in the supplied CD-ROM.

[SHUTTER SETTING]

(Only for PT-EZ590, PT-EW650 and PT-EX620)
Enable/disable the shutter function automatically (shutter: closed/open) when the power is turned on.
Setting [STARTUP]
1) Press as to select [SHUTTER SETTING].
2) Press the <ENTER> button.
f The [SHUTTER SETTING] screen is displayed.
3) Press as to select [STARTUP].
4) Press qw to switch the item.
[OPEN]
[CLOSE]
Setting [SHUT-OFF]
1) Press as to select [SHUTTER SETTING].
2) Press the <ENTER> button.
f The [SHUTTER SETTING] screen is displayed.
3) Press as to select [SHUT-OFF].
Chapter 4 Settings — [DISPLAY OPTION] menu
The image which aspect ratio is 16:9 will displayed in the center.
The image which aspect ratio is 16:9 will displayed at the top.
The image which aspect ratio is 16:9 will displayed at the bottom.
The image which aspect ratio is 4:3 will displayed at the center.
The image which aspect ratio is 4:3 will displayed in the left.
The image which aspect ratio is 4:3 will displayed at the right.
Displays the Panasonic logo.
Displays the image registered by the user.
Disables the startup logo display.
Starts projection with the shutter function disabled (shutter: open) when the power is turned on.
Starts projection with the shutter function enabled (shutter: closed) when the power is turned on.
ENGLISH - 87