Chapter 3 Basic Operations — Operating with the remote control
Using the mute function
Audio can be temporarily turned off.
button
1)
Press the <MUTE> button.
f The audio disappears.
2)
Press the <MUTE> button again.
f The audio reappears.
Adjusting the volume
The volume of the built-in speaker or audio output can be adjusted.
1)
Press the <VOL-> button/<VOL+> button.
<VOL->
<VOL+>
Note
f This operation can be also performed by using the <VOL-> button/<VOL+> button on the control panel.
Using the freeze function
The projected image can be paused and the audio turned off regardless of the playback of the external device.
button
1)
Press the <FREEZE> button.
f The image freezes and the audio disappears.
2)
Press the <FREEZE> button again.
f Freezing of the image is canceled and the audio reappears.
Note
f [FREEZE] is displayed on the screen when video is paused.
f When no signal input, [KEY NOT APPLICABLE] message will appear.
Using the on-screen display function
Turn off the on-screen display function (no display) when you do not wish the viewers to see the on-screen display,
such as the menu or the input terminal name.
button
1)
Press the <ON SCREEN> button.
f The on-screen display disappears.
2)
Press the <ON SCREEN> button again.
f The on-screen display appears.
button
Decreases the volume.
Increases the volume.
ENGLISH - 55