Table of Contents
Advertisement
1
[LAMP POWER]
Selects the [LAMP POWER] setting.
2
[AUTO POWER SAVE]
Sets to [ON] when setting [AMBIENT LIGHT DETECTION],
[SIGNAL DETECTION] and [SHUTTER DETECTION]
3
[AMBIENT LIGHT DETECTION]
Selects enable ([ON])/disable ([OFF]) of the environmental
luminance interlock function.
4
[SIGNAL DETECTION]
Selects enable ([ON])/disable ([OFF]) of the no signal interlock
function.
*1 [SHUTTER DETECTION] is for PT-EZ590, PT-EW650 and PT-EX620
[AV MUTE DETECTION] is for PT-EW550 and PT-EX520, it selects to enable ([ON])/disable ([OFF]) of the AV mute detection function.
Note
f For details of each setting item, refer to the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] ( x page 93) on the projector.
[E-mail set up] page
When there is a problem or the runtime of a lamp reaches a set value, an E-mail can be sent to preset E-mail
addresses (up to two addresses).
Click [Detailed set up] → [E-mail set up].
1
[ENABLE]
Select [Enable] to use the E-mail function.
2
[SMTP SERVER NAME]
Enter the IP address or the server name of the E-mail server
(SMTP). To enter the server name, the DNS server needs to be
set up.
3
[MAIL FROM]
Enter the E-mail address of the projector. (Up to 63 characters
in single byte)
4
[MEMO]
Enter information such as the location of the projector that
notifies the sender of the E-mail. (Up to 63 characters in single
byte)
Chapter 5 Operation of Function — Web control function
.
*1
5
[SHUTTER DETECTION]
*1
Selects to enable ([ON])/disable ([OFF]) of the shutter interlock
function.
6
[POWER MANAGEMENT]
Selects the power consumption mode.
7
[TIMER]
Selects the time that the lamp is turned off when the POWER
MANAGEMENT function is using.
8
[Submit]
Updates the settings.
1
2
3
4
5
6
5
[MINIMUM TIME]
Change the minimum interval for the temperature warning
E-mail. The default value is 60 minutes. In this case, another
E-mail will not be sent for 60 minutes after sending the
temperature warning E-mail even if it reaches the warning
temperature.
6
[INTAKE AIR TEMPERATURE]
Change the temperature setting for the temperature warning
mail. A temperature warning E-mail is sent when the
temperature exceeds this value.
1
2
3
4
5
6
7
8
ENGLISH - 127
Advertisement
Table of Contents
