Panasonic PT-EZ590 Operating Instructions Manual page 132

[User] account
1 [Account]
Displays the account to change.
2 [New]
[User name]:
Enter the desired new user name. (Up to 16 characters in single
byte)
[Password]:
Enter the desired new password. (Up to 16 characters in single
byte)
[Password(Retype)]:
Enter the desired new password again.
[Change password] (For user rights)
The change of password is enabled only under the user rights.
1 [Old Password]
Enter the current password.
2 [New Password]
Enter the desired new password. (Up to 16 characters in single
byte)
Note
f To change the account of the administrator, you must enter the [User name] and the [Password] in [Current].
[Crestron Connected(TM)] page
The projector can be monitored/controlled with Crestron Connected
To start the control page of Crestron Connected
administrator rights. (For user rights, the [Crestron Connected(TM)] button is not displayed on the web control
screen.)
The control page of Crestron Connected
It is not displayed if Adobe
support Flash. In that case, click [Back] on the control page to go back to the previous page.
132 - ENGLISH
Chapter 5 Operation of Function — Web control function
TM
from the web control screen, you need to access with the
TM
is displayed by clicking [Crestron Connected(TM)].
® ®
Flash Player is not installed on the computer used, or the browser used does not
1
2
3
3 [OK]
Determines the change of password.
3 [Retype]
Enter the desired new password again.
4 [OK]
Determines the change of password.
TM
.
1
2
3
4