Table of Contents
Advertisement
[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" ( x page 62) for the operation of the menu screen.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source and the environment in which the
projector is used.
1)
Press as to select [PICTURE MODE].
2)
Press qw or the <ENTER> button.
f The [PICTURE MODE] individual adjustment screen is displayed.
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[STANDARD]
[DYNAMIC]
[DICOM SIM.]
[BLACKBOARD]
[WHITE BOARD]
[CINEMA]
*1
[NATURAL]
*2
*1 Only for movie-based input signals
*2 Only for still image input signals
Note
f DICOM is an abbreviation of "Digital Imaging and COmmunication in Medicine" and is a standard for medical imaging devices. Although the
DICOM name is used, the projector is not a medical device, and should not be used for purposes such as diagnosis of display images.
f When [PICTURE MODE] is set to [DICOM SIM.], the [DAYLIGHT VIEW] is fixed to [OFF].
f When [PICTURE MODE] is set to [DICOM SIM.], the [LAMP POWER] in the [PROJECTOR SETUP] menu is fixed to [ECO].
[CONTRAST]
You can adjust the contrast of the colors.
1)
Press as to select [CONTRAST].
2)
Press qw or the <ENTER> button.
f The [CONTRAST] individual adjustment screen is displayed.
3)
Press qw to adjust the level.
Operation
Press the w button.
Press the q button.
Attention
f Adjust [BRIGHTNESS] first when you need to adjust [BRIGHTNESS] and [CONTRAST].
[BRIGHTNESS]
You can adjust the dark (black) part of the projected image.
1)
Press as to select [BRIGHTNESS].
2)
Press qw or the <ENTER> button.
f The [BRIGHTNESS] individual adjustment screen is displayed.
3)
Press qw to adjust the level.
66 - ENGLISH
Chapter 4 Settings — [PICTURE] menu
The image becomes suitable for moving images in general.
The light output is maximized for use in bright areas.
The image becomes similar to that of DICOM Part 14 Grayscale Standard.
The image becomes suitable for projecting on a blackboard.
The image becomes suitable for projecting on a white board.
The image becomes suitable for movie contents.
The image becomes suitable for using in low-light areas.
Adjustment
Brightens the screen and makes the color of image deeper.
Darkens the screen and makes the color of image lighter.
Range of adjustment
~
-32
+32
Advertisement
Table of Contents
