Table of Contents
Advertisement
<HDMI 1 IN> terminal/<HDMI 2 IN> terminal pin assignments and signal names
Outside view
Even-numbered pins of (2) to (18)
(2)
(18)
(1)
(19)
Odd-numbered pins of (1) to (19)
Connecting example: AV equipment
Video deck (TBC built-in)
Video deck (TBC built-in)
Attention
f Always use one of the following when connecting a VCR.
g A VCR with built-in time base corrector (TBC)
g A time base corrector (TBC) between the projector and the VCR
f If nonstandard burst signals are connected, the image may be distorted. In such case, connect the time base corrector (TBC) between the
projector and the external devices.
Note
f For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to HDMI standards
is used, images may be interrupted or may not be displayed.
f The <HDMI 1 IN> terminal/<HDMI 2 IN> terminal of the projector can be connected to an external device with a DVI-D terminal by using an
HDMI/DVI conversion cable, but some devices may not project the image properly or function properly.
f The projector does not support VIERA Link (HDMI).
f If the [AUDIO IN SELECT] settings are incorrect, the projector may have malfunctions such as the absence of audio.
f When Y/C signals are input to the <RGB 1 IN> terminal, switch the setting by using the [DISPLAY OPTION] menu → [RGB IN] → [RGB1
INPUT SETTING]. ( x page 82)
Chapter 2 Getting Started — Connecting
Pin No.
Signal name
(1)
T.M.D.S data 2+
(2)
T.M.D.S data 2 shield
(3)
T.M.D.S data 2-
(4)
T.M.D.S data 1+
(5)
T.M.D.S data 1 shield
(6)
T.M.D.S data 1-
(7)
T.M.D.S data 0+
(8)
T.M.D.S data 0 shield
(9)
T.M.D.S data 0-
(10)
T.M.D.S clock+
Blu-ray disc player
Pin No.
Signal name
(11)
T.M.D.S clock shield
(12)
T.M.D.S clock-
(13)
CEC
(14)
—
(15)
SCL
(16)
SDA
DDC/CEC
(17)
GND
(18)
+5 V
(19)
Hot plug detection
Audio equipment
ENGLISH - 41
Advertisement
Table of Contents
