Table of Contents
Advertisement
Chapter 3 Basic Operations — Operating with the remote control
Operating with the remote control
Using the shutter/AV mute function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to
turn off the image and the audio temporarily.
r Shutter function
(Only for PT-EZ590, PT-EW650 and PT-EX620)
button
1)
Press the <SHUTTER> button.
f The image and the audio disappear.
f This operation can be also performed by using the <SHUTTER> button on the control panel.
2)
Press the <SHUTTER> button again.
f The image and the audio reappear.
r AV mute function
(Only for PT-EW550 and PT-EX520)
button
1)
Press the <AV MUTE> button.
f The image and the audio disappear.
f This operation can be also performed by using the <AV MUTE> button on the control panel.
2)
Press the <AV MUTE> button again.
f The image and the audio reappear.
Attention
f When the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [SHUTTER DETECTION] or [AV MUTE DETECTION] is set to [ON],
do not switch on/off in a short time.
Note
f The power indicator <ON (G)/STANDBY(R)> will blink slowly in green while the shutter function is in use (shutter: closed).
f The shutter function is released by pressing the <RETURN> button while the shutter function is in use (shutter: closed).
54 - ENGLISH
For PT-EZ590, PT-EW650
and PT-EX620
For PT-EW550
and PT-EX520
Advertisement
Table of Contents
