Panasonic PT-EZ590 Operating Instructions Manual page 126

Hide thumbs Also See for PT-EZ590:
Table of Contents

Advertisement

Wireless LAN
(Only when the wireless module is attached)
1 [WIRELESS LAN]
Selects [Enable] when you want to enable the wireless LAN
function.
2 [SSID]
Sets the SSID for use.
3 [CHANNEL]
Selects the channel for use.
Note
f Changing LAN settings while connected to the LAN may cause the connection to cut out.
f The setting values of the [Network config] page will return to the factory default when the [INITIALIZE] of the [NETWORK] menu is executed ( x
page 110).
f The [ENCRYPTION] is set to [DISABLE] in the factory default setting. If you want to communicate with wireless LAN, it is recommended that
the [ENCRYPTION] is set to [WPA2-PSK (AES)] for security.
[Ping test] page
Check whether the network is connected to the E-mail server, POP server, DNS server, etc.
Click [Detailed set up] → [Ping test].
1
[Input IP address]
Enter the IP address of the server to be tested.
2
[Submit]
Executes the connection test.
[ECO management set up] page
Settings related to the ECO management function of the projector can be made.
Click [Detailed set up] → [ECO management set up].
126 - ENGLISH
Chapter 5 Operation of Function — Web control function
4 [ENCRYPTION]
Selects [WPA2-PSK(AES)] when performing encrypted
communications.
5 [KEY]
Sets the key to be used when performing encrypted
communications.
8 to 15 alphanumerics can be input.
6 [Back], [Change]
Click the [Back] button to return to the original screen. The setting
change screen is displayed by pressing the [Change] button.
Click the [Submit] button to update the settings.
1
2
3
Example of display when the connection has succeeded
4
Example of display when the connection has failed
1
2
3
4
5
6
3
4

Advertisement

Table of Contents
loading

Table of Contents