Table of Contents
Advertisement
f The [SCREEN ADJUSTMENT] screen is displayed.
3)
Press as to select [CURVED CORRECTION].
4)
Press the <ENTER> button.
f The [CURVED CORRECTION] screen is displayed.
5)
Press as to select one item to adjust.
[LENS THROW RATIO]
[KEYSTONE]
[ARC]
[BALANCE]
[MAINTAIN ASPECT RATIO]
6)
Press the <ENTER> button.
f The individual adjustment screen of the selected function is displayed.
Adjusting [LENS THROW RATIO]
1)
Press qw to adjust.
f For details, please refer to "Setting [KEYSTONE]" → "Adjusting [LENS THROW RATIO]" ( x page 72).
Adjusting [KEYSTONE]
1)
Press asqw to adjust.
f For details, please refer to "Setting [KEYSTONE]" → "Adjusting [KEYSTONE]" ( x page 72).
Adjusting [ARC]
1)
Press asqw to adjust.
Items
Press the q button.
[H]
Press the w button.
Press the a button.
[V]
Press the s button.
Adjusting [BALANCE]
1)
Press qw to adjust.
f For details, please refer to "Setting [KEYSTONE]" → "Adjusting [BALANCE]" ( x page 72).
Note
f One of [KEYSTONE], [CORNER CORRECTION] and [CURVED CORRECTION] setting value is valid. When [KEYSTONE], [CORNER
CORRECTION] or [CURVED CORRECTION] adjustment is finished, you adjust the others, the adjusted value will be reset.
f Press the <SCREEN ADJ> button on the remote control when the [KEYSTONE], [CORNER CORRECTION] or [CURVED CORRECTION]
screen is displaying, it will switch to the next adjustment screen.
f When the [CORNER CORRECTION] individual adjustment screen is displaying, the individual adjustment screen of the next corner can also
be displayed by pressing the <ENTER> button.
74 - ENGLISH
Chapter 4 Settings — [POSITION] menu
Adjusts when the throw ratio of projector lens is changed.
Adjusts when the trapezoid of the projected image is distorted.
Adjusts when the radian of the projected image is distorted.
Adjusts according to the lens shift range in the horizontal or vertical direction.
Set to [ON], maintain the aspect ratio when correct the curved distortion of the projected image.
Operation
The top and the bottom of horizontal line will
be bulge.
The top and the bottom of horizontal line will
be dent.
The left and the right of vertical line will be
dent.
The left and the right of vertical line will be
bulge.
Adjustment
Advertisement
Table of Contents
