Powering On The Mediaaccess Gateway - Technicolor MediaAccess TG788VN Setup And User Manual

3 MANUAL INSTALLATION

3.2 Powering on the MediaAccess Gateway

Procedure
Proceed as follows:
1 Connect the power cord to the power port of the MediaAccess Gateway.
2 Plug the other end of the power cord into an electrical outlet.
3 Press the power button to turn on the MediaAccess Gateway.
4 Wait at least two minutes to allow the MediaAccess Gateway to complete the start up phase.
22
DMS-CTC-20120510-0000 v1.0