Technicolor MediaAccess TG788VN Setup And User Manual page 93

Option 1: content-based filter (combined with the address-based filter)
If you want to use the content-based filtering:
1 Browse to the MediaAccess Gateway
For more information, see
2 On the Toolbox menu, click Parental Control.
3 On the Navigation
4 Make sure that the Use Content-Based Filter check box is selected.
5 Configure the content-based filter. For more information, see
6 If you want to make exceptions for specific web sites, add the necessary rules in the address-based filter. For more
information, see
Option 2: address-based filter only
Take this option if content filtering is not available on your MediaAccess Gateway or you don't want to use it.
To configure address-based filtering:
1 Browse to the MediaAccess Gateway
For more information, see
2 On the Toolbox menu, click Parental Control.
3 On the Navigation
4 Make sure that the Use Address-Based Filter check box is selected.
5 In the Action for Unknown Sites, select:
 Allow as the default rule if you want to allow access to all web sites and manually specify which web sites may not be
accessed.
Block as the default rule if you want to deny access to all web sites and manually specify a number of web sites that

may be accessed.
6 Click Apply.
7 If you want to make exceptions for specific web sites, add the necessary rules in the address-based filter.
For more information, see
DMS-CTC-20120510-0000 v1.0
GUI.
"Accessing the MediaAccess Gateway GUI" on page
bar, click Configure.
"10.1.2 Adding Rules for Address-Based Filtering" on page
GUI.
"Accessing the MediaAccess Gateway GUI" on page
bar, click Configure.
"10.1.2 Adding Rules for Address-Based Filtering" on page
10 INTERNET SECURITY
33.
"10.1.1 Configuring Content-based Filtering" on page
95.
33.
95.
94.
93